SMUGDESK 3-Pack 10FT USB 3.0 Extension Cable Type A Male to Female
Three 10 ft USB 3.0 Type A male-to-female cables extend peripherals up to 5 Gbps and work with USB 2.0 and 1.1 ports
- Extend devices up to 10 ft from the host
- Three cables included for multiple setups
- Up to 5 Gbps transfer with USB 3.0 gear
- Works with USB 2.0 and 1.1 ports too
- Reinforced ends survive over 20 000 bend cycles
Three-cable 10-foot kit
This pack supplies three USB 3.0 Type-A male-to-female extension cables, each measuring 10 feet. They are designed to extend the reach of compatible peripherals such as webcams, external hard drives, printers, keyboards, mice and USB hubs. The cables support SuperSpeed USB 3.0 data rates up to 5 Gbps when both host and device are USB 3.0 compliant. Backward compatibility with USB 2.0 and USB 1.1 ports is maintained.
Suits setups needing long runs
The 10-foot length suits desks, workstations or living-room arrangements where the host port is far from the peripheral. Builders who need only a short reach or who require USB-C or Micro-B connectors should look at other cable types. The male-to-female configuration extends an existing cable; it does not connect two host ports directly.
5 Gbps SuperSpeed rating
The decisive specification is the USB 3.0 SuperSpeed rating of 5 Gbps, which applies only when the source and the device both support USB 3.0. If either end operates at USB 2.0 or 1.1, throughput falls to the lower standard.
How it compares
Measured against everything we stock in USB Cords & Extension Cables, at today’s prices. Recalculated every night.
- Price $17.99
- Pricier than about 70% of the 15,187 comparable items (median $14.99).
New to this? Buying a printer and toner with crypto — what to check, what it costs to pay, and what is never asked for.
Specifications
No published specifications for this item yet.
Other versions of this model
5 more in the same range
Questions about this item
Will these 10 ft cables work with my USB 2.0 printer and hub?
Yes, each cable is backwards compatible with USB 2.0 and USB 1.1 ports, so your existing printer and hub will function normally at their rated speeds.
How can I confirm the 5 Gbps link is active after plugging in a 3.0 drive?
Check the transfer rate in your OS or run a quick file copy; sustained reads near 5 Gbps indicate the SuperSpeed connection is negotiated.
What comes in the 3-pack and do I need any extra adapters?
The box contains three 10 ft USB 3.0 Type-A male-to-female extension cables; no additional adapters are required for standard Type-A devices.
More in USB Cords & Extension Cables
Similar items
Tripp Lite U026-016 USB 2.0 Active Extension Cable 16 ft
- USB A to USB A
- USB 2.0
RIITOP CMM-E30L USB 3.2 Gen2 C to C cable 10ft 10Gbps 100W PD right-angle
- USB C to USB C
- 10 ft (3.05 m)
Tripp Lite U022-015 USB 2.0 A to B cable 15 ft
- USB A to USB B
- USB 2.0
j5create JUC400 USB 2.0 A-to-A cable 5.9 ft
- USB A to USB A
- 5.9 ft (1.8 m)










