SMUGDESK 4-Port PCIe 2.0 to USB 3.0 Expansion Card
Adds four USB 3.0 ports via a PCIe 2.0 x1 slot with hot-swap support for drives and peripherals
- Adds four USB 3.0 ports for extra peripherals
- PCIe 2.0 interface delivers 5 Gbps transfer speeds
- Hot-swap support lets you swap devices without shutdown
- Fits x1, x4, x8 or x16 motherboard slots
- Works with Windows and Linux, no drivers needed
Four-Port USB 3.0 Expansion
This SMUGDESK card adds four USB 3.0 Type-A ports to a desktop computer through a single PCIe 2.0 x1 slot. It targets builders who need more high-speed connections for external drives, hubs or mining risers without replacing the motherboard. The plug-and-play design works with Windows and Linux systems.
Sustained 5 Gbps Throughput
The onboard controller maintains the full USB 3.0 5 Gbps rate during extended transfers rather than throttling after a short burst. Hot-swap support lets users attach or remove storage devices while the host stays powered, avoiding downtime on long copy jobs or mining operations.
PCIe x1 Flexible Mounting
The x1 edge connector fits x1, x4, x8 or x16 motherboard slots, giving installers placement freedom inside tight chassis. Four rear-facing ports keep cables accessible at the back panel, and the card requires no auxiliary power cable for operation.
How it compares
Measured against everything we stock in Interface & Card Adapters, at today’s prices. Recalculated every night.
- Price $18.99
- Cheaper than about 65% of the 353 comparable items (median $21.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
No published specifications for this item yet.
Questions about this item
Does the PCIe 2.0 x1 interface deliver full 5Gbps bandwidth on all four USB 3.0 ports under continuous load?
The card uses a PCIe 2.0 x1 link and a stable main control chip to provide consistent 5Gbps USB 3.0 data transfer across its four ports.
What slot type and operating-system support are required to install this expansion card?
It fits any PCIe x1, x4, x8 or x16 slot and works plug-and-play with Windows and Linux systems.
Can I add this card to an older motherboard that only has PCIe 1.0 slots?
The card follows the PCIe 2.0 specification and is designed for PCIe 2.0 or newer slots; compatibility with PCIe 1.0 is not guaranteed by the manufacturer.
More in Interface & Card Adapters
Similar items
Tripp Lite U261-001-BT5 Bluetooth 5.0 USB 2.0 Type A data adapter
- 3 Year
Silverstone ECD01 USB 2.0 to dual RS232 data adapter
- ATX Mid Tower
VKLSVAN 471 CH341A Programmer SOP8 SOIC8 Test Clip 24 25 93 Series Data Adapter
- 2.0066 L x6.604 W x…
- Isp, 6 L x2.5 W x1…
shenzhen tianxunda technology Co.,Ltd AY17A USB 3.0 to HDMI data adapter
- Adapter





