Silverstone CPS05-RE SFF-8643 36-Pin to SATA 7-Pin x4 Sideband Cable 600mm
- SAS ports: 4
- SAS / SATA
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
Connects a Mini SAS 36-pin host to four 29-pin SAS drives with integrated IDE power over a 50cm shielded harness
This new SMUGDESK internal cable converts a 36pin Mini SAS SFF-8087 host port into four 29pin SFF-8482 target connectors for SAS hard disks. An integrated IDE power connector supplies drive power directly from the harness, reducing separate wiring inside the chassis. The 50cm length suits medium-distance routing in standard rackmount servers and multi-drive NAS systems. Shielded construction supports reliable SAS data transmission for RAID arrays and storage backplanes.
Builders connecting SFF-8482 SAS HDDs or SSDs to a Mini SAS controller while drawing power from an IDE header will find the pinout and reach matched to that task. Server integrators populating backplanes or direct-attached RAID enclosures gain a single-cable solution for both data and power. Teams needing a different target connector, a longer trunk run or a pure data cable without the integrated power lead should look at other cable types.
The cable terminates in four SFF-8482 29pin plugs, so every drive bay must accept that specific SAS target connector. If the drives or backplane use a different interface, the harness will not mate. Verify the target side before ordering.
Measured against everything we stock in SAS, SCSI, InfiniBand & MCIO Cables, at today’s prices. Recalculated every night.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
No published specifications for this item yet.
The 50cm length is designed for medium-distance routing in standard rackmount servers, providing enough slack for typical 4U drive cage layouts without excess cable bulk.
Each SFF8482 29pin connector clicks firmly into the SAS drive port; check that all four fanout ends are fully latched and the RAID controller detects every drive at boot.
The cable has an integrated IDE power connector; you still need a standard 4-pin Molex lead from your power supply to feed that connector.
More in SAS, SCSI, InfiniBand & MCIO Cables
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?