Silverstone CPS05-RE SFF-8643 36-Pin to SATA 7-Pin x4 Sideband Cable 600mm
- SAS ports: 4
- SAS / SATA
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
Connects a Slimline SAS 4.0 port to four left-angle SATA drives using 30AWG copper wire for short internal routing
This 0.5M internal cable converts a single SFF8654 38Pin Slimline SAS 4.0 port into four left-angle SATA 7Pin connectors. It is built with 30AWG pure copper wire to maintain PCIe 4.0-level signal integrity across the short run. The assembly targets administrators expanding drive counts inside rackmount servers or dense NAS enclosures.
The left-angle SATA ends simplify routing in tight backplanes where straight connectors would block adjacent slots. It suits 2.5in and 3.5in HDDs or SSDs attached to a RAID controller or HBA with an SFF8654 uplink. Installers needing right-angle SATA plugs, longer reach beyond 0.5M, or a different uplink standard should select another cable.
The cable only works when the host side presents an SFF8654 38Pin Slimline SAS 4.0 receptacle. A mismatched controller port will prevent connection regardless of drive compatibility. Verify the controller or backplane documents list this exact connector before ordering.
Measured against everything we stock in SAS, SCSI, InfiniBand & MCIO Cables, at today’s prices. Recalculated every night.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
No published specifications for this item yet.
After installation the RAID controller BIOS should detect every attached 2.5 or 3.5 drive and report link speeds consistent with SAS 4.0 operation.
The box includes the 0.5M SFF8654 38Pin to 4×SATA 7Pin left-angle cable only; compatible RAID controller, drives and mounting hardware must be sourced separately.
The 19.68in left-angle SATA breakout with 30AWG shielding is designed for short-distance internal routing in dense backplanes.
More in SAS, SCSI, InfiniBand & MCIO Cables
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?