SMUGDESK 66FT DisplayPort 1.4 Optical Fiber Cable 8K@60Hz 4K@144Hz 32.4Gbps In Wall
A 66-foot DisplayPort 1.4 optical fibre cable carries 8K at 60 Hz or 4K at 144 Hz with 32.4 Gbps bandwidth for in-wall runs
Cable Length 66 ft.
- 8K resolution at 60 Hz for ultra-sharp visuals
- 4K at 144 Hz refresh rate for smooth gaming motion
- 4 Gbps bandwidth over 66 ft optical fibre
- 24 K gold-plated connectors resist corrosion for lasting signal quality
- Plug-and-play fibre design needs no external power or drivers
66FT DP 1.4 Optical Cable
This 66FT DisplayPort 1.4 optical fibre cable carries 8K at 60Hz or 4K at 144Hz over long distances without signal loss. It supports 7680x4320 resolution and 32.4Gbps bandwidth for HDTV, projector, gaming or workstation extension. Gold-plated connectors and four-core fibre ensure stable, plug-and-play transmission.
Suited For Long-Run 8K Installations
Ideal for users who need an in-wall DisplayPort link up to 66FT at 8K 60Hz or 4K 144Hz. Not suited for buyers who require a shorter passive copper cable, who need HDMI or USB-C ends, or who want a cable rated for outdoor or plenum spaces.
Unidirectional Fibre Design
The optical cable is directional; the source and display ends must be connected correctly for the 8K 60Hz signal to pass. Check the marked connectors before routing the cable through walls or conduit.
How it compares
Measured against everything we stock in DisplayPort Monitor Cables, at today’s prices. Recalculated every night.
- Price $59.99
- Pricier than about 86% of the 3,801 comparable items (median $15.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
No published specifications for this item yet.
Other versions of this model
5 more in the same range
SMUGDESK Fiber Optic DisplayPort Cable 50ft 8K@60Hz 4K@144Hz 32.4Gbps
SMUGDESK Fiber Optic DisplayPort Cable 50ft 8K@60Hz 4K@144Hz 32.4Gbps DP1.4
Questions about this item
What connector type and length does the 66FT SMUGDESK cable use for in-wall routing?
It uses DisplayPort male connectors on both ends and measures 66 feet, designed for in-wall installation with a directional fibre core.
Which end of the directional optical cable connects to the GPU such as an RTX 3070 or 3080?
The connector marked Source plugs into the graphics card output, while the Display end goes to the monitor or projector; reversing them will prevent signal transmission.
Are the gold-plated connectors rated for repeated mating cycles if the cable is pulled through conduit later?
The 24K gold-plated DisplayPort plugs resist corrosion and maintain contact integrity during installation, but the optical fibre itself is not rated for repeated flexing after termination.
More in DisplayPort Monitor Cables
Similar items
Nippon Labs 50DP14V-MM-10 displayport cable 10 ft 1.4 HBR3 32.4 Gbps 8K 60Hz
- 10 ft (3.05 m)
- DisplayPort Cable
Omni Gear DP-10-HDMI 10 ft DisplayPort cable
- 10 ft (3.05 m)
- DisplayPort to HDMI
Tripp Lite P582-020 DisplayPort to HDMI cable 20 ft 1080p
- 20 ft (6.1 m)
- DisplayPort to HDMI
LUOM TJ-A013 DisplayPort 1.4 Fiber Cable 50FT VESA Certified 32.4Gbps 8K@60Hz 4K@144Hz
- 1 x DisplayPort 1.4
- 1 x DisplayPort 1.4










