SMUGDESK DisplayPort 2.1 cable 80Gbps 16K@60Hz 1m
DisplayPort 2.1 cable delivers 80Gbps bandwidth for 16K@60Hz, 8K@120Hz and 4K@240Hz with HDR and HDCP 2.2
- Supports 16K at 60 Hz for ultra-detailed visuals
- 80 Gbps bandwidth enables 4K at 240 Hz gaming
- Dynamic HDR and HDCP 2.2 deliver vivid protected content
- 28 AWG copper with triple shielding resists signal interference
- Aluminium shell and 15 000-bend life ensure durable daily use
What this cable delivers
The SMUGDESK DisplayPort 2.1 cable carries 80Gbps bandwidth over a one-metre run. It supports 16K at 60Hz, 8K at 120Hz, and 4K at up to 240Hz with Dynamic HDR 4:4:4 and HDCP 2.2. The 28AWG oxygen-free copper conductors and triple-layer shielding keep the signal clean. Gold-plated connectors and an aluminium shell resist corrosion and dissipate heat.
Replacing an older link
Swapping a legacy DisplayPort cable for this one unlocks the full 80Gbps path required by new monitors running 4K at 165Hz or 240Hz. The jump is worth it when your display and GPU both implement the 2.1 standard and you need 10K or 16K resolution, or 4K at 240Hz, without compression artefacts. The 15,000-bend rating and nylon braid survive frequent re-routing.
Who should buy and who should not
This cable suits PC gamers and creators driving 4K high-refresh panels, 8K workflows, or early 16K displays that demand the full 80Gbps link. It is not for buyers who only need 1080p or 4K at 60Hz, where a cheaper legacy cable meets the requirement. It is also not for installations needing runs longer than one metre, since this length is fixed.
How it compares
Measured against everything we stock in DisplayPort Monitor Cables, at today’s prices. Recalculated every night.
- Price $14.99
- Cheaper than about 60% of the 3,801 comparable items (median $15.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
No published specifications for this item yet.
Other versions of this model
5 more in the same range
SMUGDESK DisplayPort 2.1 cable 6.6ft 80Gbps 16K@30Hz 8K@120Hz 4K@240Hz 2K@360Hz HDR HDCP2.2
SMUGDESK DisplayPort 1.4 Cable 10ft 8K 60Hz 4K 144Hz Nylon Braided
Questions about this item
Will the 1 m length and standard DisplayPort connector reach my monitor without strain?
The cable is 1 m (3.3 ft) long and uses a standard DisplayPort plug that fits any DP, DP++ or DisplayPort++ port on monitors, TVs, PCs or laptops.
Do I need drivers or a special seating technique for the 80 Gbps link?
No drivers are required; simply push the gold‑plated connector straight in until the latch clicks — angling the plug is the common mistake that prevents full contact.
How long will the 28 AWG OFC conductors and nylon braid last with daily bending?
The cable is rated for over 15 000 bend cycles and the triple‑shielded 28 AWG OFC conductors resist EMI, so normal desk routing will not degrade signal quality.
More in DisplayPort Monitor Cables
Similar items
Nippon Labs 50DP14V-MM-10 displayport cable 10 ft 1.4 HBR3 32.4 Gbps 8K 60Hz
- 10 ft (3.05 m)
- DisplayPort Cable
Chopmate VESA Certified DisplayPort 1.2 Cable 6.6ft 4K 60Hz 2K 165Hz Gold-Plated Nylon Braided
Omni Gear DP-10-HDMI 10 ft DisplayPort cable
- 10 ft (3.05 m)
- DisplayPort to HDMI
QVS DPHD-06 DisplayPort to HDMI cable 6 ft 1920 x 1200
- Consumer Electronics
Tripp Lite P582-020 DisplayPort to HDMI cable 20 ft 1080p
- 20 ft (6.1 m)
- DisplayPort to HDMI










