Silverstone CPS05-RE SFF-8643 36-Pin to SATA 7-Pin x4 Sideband Cable 600mm
- SAS ports: 4
- SAS / SATA
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
Splits a single SFF-8654 8i port into two SFF-8654 4i connections for PCIe 5.0 NVMe storage at 32 Gbps over a .5 m low-loss copper harness
This Gen5 Slimline MCIO cable splits a single SFF-8654 8i port into two SFF-8654 4i connectors. It supports PCIe 5.0 at 32Gbps for high-speed NVMe SSD and RAID controller links. The .5 metre length suits compact server chassis routing. Premium low-loss copper and heavy shielding maintain signal integrity in dense deployments.
Replaces single-port cables or PCIe 4.0 assemblies when density and throughput must scale together. The one-to-two breakout adds a second NVMe device without consuming another HBA port. The jump is worth it when your backplane or RAID card needs two 4i links from one 8i source. Not for builders who need more than two 4i branches or a different connector family.
Confirm your HBA, RAID card or motherboard exposes an SFF-8654 8i receptacle wired for PCIe 5.0. Ensure each target drive or backplane accepts an SFF-8654 4i plug. Measure the internal path to ensure .5 metre (19.68in) covers the run without tension. Not for external enclosures or mixed-connector topologies.
Measured against everything we stock in SAS, SCSI, InfiniBand & MCIO Cables, at today’s prices. Recalculated every night.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
No published specifications for this item yet.
The cable splits one SFF-8654 8i port into two SFF-8654 4i connectors, so the source side needs a single 8i receptacle with standard pitch.
They forget to seat both 4i ends fully until the latch clicks, leaving one NVMe link running at reduced width.
Replace it if link errors appear, after a chassis rebuild that stresses the cable, or when upgrading to a newer PCIe 5.0 controller that demands tighter signal margins.
More in SAS, SCSI, InfiniBand & MCIO Cables
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?