Silverstone CPS05-RE SFF-8643 36-Pin to SATA 7-Pin x4 Sideband Cable 600mm
- SAS ports: 4
- SAS / SATA
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
A right-angle Mini SAS HD SFF-8643 cable that routes neatly in tight server chassis while shielding signals for stable RAID and NAS operation
This 50-centimetre Mini SAS HD cable connects a straight SFF-8643 port to a 90-degree SFF-8643 port. It is designed for server, RAID and NAS chassis where straight plugs would press against drive cages or side panels. The right-angle end removes the need for sharp bends that can damage insulation over time. Shielded construction supports stable high-speed SAS transmission under continuous load.
The 90-degree connector solves routing problems in narrow drive bays and between stacked expansion cards. It is worth fitting when a straight plug would force the cable into a tight radius or block airflow through the chassis. The 50-centimetre length keeps internal wiring tidy without leaving coils that trap heat. Builders who need a longer run or a different connector pitch will need another solution.
Connect a RAID controller or HBA directly to a drive backplane or storage expansion module using the SFF-8643 interface on both ends. The shielded cable reduces electromagnetic interference in dense 24/7 environments. Verify that both devices use SFF-8643 Mini SAS HD ports; this cable does not mate with SFF-8087 or other SAS interfaces without an adapter.
Measured against everything we stock in SAS, SCSI, InfiniBand & MCIO Cables, at today’s prices. Recalculated every night.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
No published specifications for this item yet.
The right-angle plug sits flush against the port, so only the cable thickness projects rearward; allow space for the bend radius.
Push each connector straight in until the latch clicks; the right-angle end must be aligned before applying force to avoid bending the pins.
Replace it if the latch tabs break, the jacket shows kinks or cuts, or intermittent link errors appear on the SAS controller logs.
More in SAS, SCSI, InfiniBand & MCIO Cables
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?