Silverstone CPS05-RE SFF-8643 36-Pin to SATA 7-Pin x4 Sideband Cable 600mm
- SAS ports: 4
- SAS / SATA
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
Converts internal SFF8087 to external SFF8088 for SAS storage expansion at 6Gbps with 28AWG copper over 39.37in
This SMUGDESK cable converts an internal Mini SAS HD SFF8087 port to an external SFF8088 interface, letting a server or workstation connect to an outside storage enclosure. It is built for administrators who need to extend a RAID array, attach a JBOD shelf or link a NAS appliance without replacing the host controller. The 28AWG copper conductors keep signal loss low across the link.
The assembly is rated for up to 6 Gbps per lane, so total throughput depends on the controller and the number of active lanes in the SFF8087 source. Longer runs or additional adapters in the chain can reduce the practical ceiling below that figure. Cable length is fixed at 1 metre (39.37 in), which limits placement flexibility in larger racks.
The harness is stiff enough to hold a routed path yet pliable enough to thread through standard cable-management arms. The main installation risk is exceeding the minimum bend radius when dressing the cable behind a dense backplane, which can degrade the 6 Gbps signal. No drivers or configuration are required; the link trains automatically once both ends are seated.
Measured against everything we stock in SAS, SCSI, InfiniBand & MCIO Cables, at today’s prices. Recalculated every night.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
No published specifications for this item yet.
The 28AWG copper conductors provide low-loss signal transmission at 6Gbps, making this gauge suitable for standard server-to-enclosure links up to one metre.
It supports full 6Gbps SAS bandwidth across the link, so each connected drive or enclosure can sustain its rated throughput without cable-induced bottlenecks.
The cable bridges an internal SFF8087 Mini SAS port to an external SFF8088 port, letting you attach external storage enclosures directly to an internal RAID controller or HBA.
More in SAS, SCSI, InfiniBand & MCIO Cables
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?