Silverstone CPS05-RE SFF-8643 36-Pin to SATA 7-Pin x4 Sideband Cable 600mm
- SAS ports: 4
- SAS / SATA
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
A 2-in-1 harness converts Mini SAS HD SFF8644 to dual SFF8482 29P SATA connectors for multi-drive server and NAS expansion
This 3 metre harness converts a Mini SAS HD SFF8644 port into two SFF8482 29P SATA connectors for multi‑drive storage links. It uses 28AWG pure copper wire to carry 12Gbps SAS 3.0 bandwidth with low resistance and strong anti‑interference performance. The 118.11 inch length supports flexible routing inside server racks and storage enclosures. Designed for connecting SAS or SATA hard drives and SSDs to Mini SAS HD host controllers.
Verify that the host controller or RAID card presents a Mini SAS HD SFF8644 interface and supports SAS 3.0 12Gbps operation. Ensure the target drives use SFF8482 29P SATA connectors and that the 3 metre reach suits your cabinet layout. Confirm the 28AWG harness fits the available cable management space and that no tighter bend radius is required by your enclosure design. The 2in1 integrated design means both SATA connectors share the single SFF8644 link.
This cable suits administrators expanding storage in servers, NAS units or data‑centre racks where a Mini SAS HD port must feed two SATA drives. Builders needing more than two drives per port, or drives with a different connector type, should look elsewhere. Environments requiring a shorter or longer harness will need an alternative length. Buyers whose host controllers lack an SFF8644 interface cannot use this harness.
Measured against everything we stock in SAS, SCSI, InfiniBand & MCIO Cables, at today’s prices. Recalculated every night.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
No published specifications for this item yet.
The cable has a Mini SAS HD SFF8644 connector on one end and two SFF8482 29P SATA connectors on the other, so no extra adapters are needed to link a controller to two drives.
The 3 metre length suits full-height rack runs and the 12 Gbps rating matches SAS 3.0 controllers, so pick this cable when your backplane and RAID card both support 12 Gbps.
It means each of the two SATA lanes can carry up to 12 Gbps of raw SAS 3.0 bandwidth, giving full controller speed to both attached drives without throttling.
More in SAS, SCSI, InfiniBand & MCIO Cables
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?