Silverstone CPS05-RE SFF-8643 36-Pin to SATA 7-Pin x4 Sideband Cable 600mm
- SAS ports: 4
- SAS / SATA
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
Connects one Mini SAS SFF-8643 controller to four SFF-8482 29Pin drives at 6Gbps over a .5m shielded cable
This 0.5-metre cable connects a single SFF-8643 Mini SAS host port to four SFF-8482 29Pin drive connectors. It supports transmission speeds up to 6Gbps for server RAID configurations. Multi-layer shielding reduces electromagnetic interference during continuous operation. The short length simplifies internal cable routing inside server chassis.
Builders expanding SAS hard disk groups on RAID controllers or storage servers will find this cable matches their port layout. It is not suited for connections requiring SFF-8643 target ports or drives with different connector types. The fixed 0.5-metre reach may not span larger enclosures or external drive shelves. Vibration-resistant moulded terminals maintain contact in long-term deployments.
The single specification that decides compatibility is the connector pairing: one SFF-8643 host end splitting to four SFF-8482 29Pin drive ends. Verify that your RAID controller presents an SFF-8643 port and that each target drive uses the 29Pin interface. Maximum supported bandwidth is 6Gbps. Cable length is 0.5 metre.
Measured against everything we stock in SAS, SCSI, InfiniBand & MCIO Cables, at today’s prices. Recalculated every night.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
No published specifications for this item yet.
The connectors are precisely moulded for tight plugging and resist loosening under long-time vibration, so they are not a routine maintenance item.
Multi-layer shielding suppresses electromagnetic interference, preventing data errors that would otherwise throttle sustained transfers.
The passive shielded design generates no noise and negligible heat, leaving thermal and acoustic load unchanged inside the chassis.
More in SAS, SCSI, InfiniBand & MCIO Cables
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?