Silverstone CPS05-RE SFF-8643 36-Pin to SATA 7-Pin x4 Sideband Cable 600mm
- SAS ports: 4
- SAS / SATA
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
Converts a 26-pin SFF8088 port to four 29-pin SFF8482 SAS ports with integrated power, 6.6ft length for server storage expansion
The SMUGDESK two-pack converts a single SFF8088 26pin MiniSAS port into four SFF8482 29pin SAS connections with integrated power leads. Each 2M/6.6FT cable links RAID controllers or HBAs directly to multiple SAS hard drives or SSDs inside servers, workstations and NAS enclosures. Builders expanding internal storage arrays use these cables to avoid separate power routing.
Shielded construction and fixed pin assignments keep signal integrity consistent across all four lanes during continuous RAID rebuilds, parity checks or bulk data migrations. The built-in power delivery maintains steady voltage to every attached drive without voltage drop that can occur with daisy-chained adapters. Enterprise workloads benefit from the cable's ability to handle constant multidrive I/O without intermittent link errors.
The SFF8088 to SFF8482 breakout supports standard SAS signalling rates but cannot exceed the controller's native lane bandwidth or the drive's maximum negotiated speed. Cable length at two metres is within specification for internal chassis routing yet long enough to introduce minimal latency in high-queue-depth scenarios. Users needing external enclosure connections or longer runs must select different connector types not provided in this kit.
Measured against everything we stock in SAS, SCSI, InfiniBand & MCIO Cables, at today’s prices. Recalculated every night.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
No published specifications for this item yet.
The cable itself is passive and adds negligible heat or power draw; the integrated power connectors simply pass through supply current to the attached SAS drives.
Your controller or backplane needs a single SFF8088 26pin MiniSAS port for each breakout cable in the pack.
Yes, each of the four SFF8482 29pin connectors carries both data and power for legacy SAS HDDs or SSDs that use that interface.
More in SAS, SCSI, InfiniBand & MCIO Cables
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?