Silverstone CPS05-RE SFF-8643 36-Pin to SATA 7-Pin x4 Sideband Cable 600mm
- SAS ports: 4
- SAS / SATA
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
Connects OCuLink host ports to SFF-8087 backplanes with an active 12 Gbps SAS cable featuring latch-locked connectors for vibration-proof 50 cm routing
This 50cm active cable bridges OCuLink SFF8611 4i host ports to SFF8087 36Pin backplane or slimline SSD connectors. Integrated signal conditioning preserves full 12Gbps bandwidth under PCIe Gen3 and Gen4 loads. Latch-locked ends on both sides resist vibration-induced disconnects in rackmount servers, workstations and NAS enclosures. Gold-plated contacts reduce EMI and attenuation for long-term reliability.
Suits builders wiring RAID HBA cards, host controllers or motherboard OCuLink ports to SFF8087 storage backplanes where secure locking and signal integrity matter. Not for external connections, longer runs beyond the supplied length or any interface outside the PCIExpress storage domain. Buyers needing a different connector pinout, passive cable or non-locking plug should look elsewhere.
The on-cable chip compensates loss across the 50cm run so the link holds 12Gbps at PCIe Gen3 and Gen4 rates without retraining. This single figure determines whether the cable matches your controller and backplane speed targets.
Measured against everything we stock in SAS, SCSI, InfiniBand & MCIO Cables, at today’s prices. Recalculated every night.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
No published specifications for this item yet.
Yes, the SFF8611 4i end plugs directly into an OCuLink port on the motherboard or a RAID HBA card for the active signal chip to operate.
The SFF8087 connector mates with standard backplanes, and the active circuitry maintains full 12Gbps bandwidth under PCIe Gen3 specification.
Check the controller BIOS or OS storage utility for a negotiated 12Gbps link speed and zero reported errors on the attached drives.
More in SAS, SCSI, InfiniBand & MCIO Cables
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?