Silverstone CPS05-RE SFF-8643 36-Pin to SATA 7-Pin x4 Sideband Cable 600mm
- SAS ports: 4
- SAS / SATA
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
Converts a single 38-pin SFF8654 4i port to dual SFF8482 drive ports with integrated SATA power for 24 Gbps NVMe, SAS and SATA storage
This PCIe 4.0 Slimline SAS breakout cable adapts a single 38-pin SFF8654 4i port into two SFF8482 drive connectors with an integrated SATA power line. It serves builders who need to connect multiple SAS, SATA or NVMe drives from one controller port in servers, NAS enclosures or workstation storage backplanes. The 1 m length supports flexible internal routing.
The 30AWG low-loss copper harness is rated for 24 Gbps transmission, which defines the practical throughput ceiling for attached drives. Signal integrity relies on the shielding built into this 1 m assembly; longer runs or additional adapters would reduce the usable margin. The cable carries data only and does not perform protocol conversion.
This assembly replaces a separate SFF8654-to-SFF8482 data cable plus a discrete SATA power cable, reducing internal clutter and connection points. The upgrade is worth it when a backplane or enclosure provides SFF8482 bays but the host adapter only exposes Slimline SAS ports. It does not add controller ports or increase the number of drives a single controller can address.
Measured against everything we stock in SAS, SCSI, InfiniBand & MCIO Cables, at today’s prices. Recalculated every night.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
No published specifications for this item yet.
The 2in1 breakout design splits a single SFF8654 4i port into two SFF8482 connectors so you can attach two drives from one controller port.
The 30AWG lowloss copper harness sustains 24Gbps throughput for NVMe, SAS and SATA drives, delivering full PCIe 4.0 bandwidth to each connected device.
The SFF8654 4i connector carries four lanes of PCIe 4.0, capping each lane at the 24Gbps signal rate supported by the 30AWG copper construction.
More in SAS, SCSI, InfiniBand & MCIO Cables
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?