Silverstone CPS05-RE SFF-8643 36-Pin to SATA 7-Pin x4 Sideband Cable 600mm
- SAS ports: 4
- SAS / SATA
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
A left-angle fanout cable converts a single SFF-8654 38-pin port to four SATA 7-pin drives using 30 AWG copper for stable RAID and multi-drive server storage
This SMUGDESK fanout cable adapts a single PCIe 4.0 Slimline SAS SFF8654 38Pin port to four standard SATA 7Pin drive connections. It is built for administrators and integrators expanding internal storage in servers or workstations using RAID controllers or host bus adapters. The 30AWG copper conductors and shielding support stable high-speed transmission for enterprise workloads. The 1M length suits standard rackmount layouts.
The left-angle SFF8654 plug saves space and improves airflow in compact chassis where straight connectors would obstruct adjacent slots or drive bays. It serves builders who need to connect up to four SATA hard drives or SSDs from one slimline controller port. Systems requiring more than four drive links per port, or a straight-angle connector for specific backplane clearance, need a different cable.
The interface conversion is fixed at one SFF8654 38Pin input fanning out to four SATA 7Pin outputs. This pin count and fanout ratio determine whether the cable matches your controller port and drive count exactly. Verify the controller presents a PCIe 4.0 Slimline SAS 4.0 SFF8654 port before purchasing.
Measured against everything we stock in SAS, SCSI, InfiniBand & MCIO Cables, at today’s prices. Recalculated every night.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
No published specifications for this item yet.
Align the left-angled SFF-8654 plug with the PCIe 4.0 Slimline SAS port keying, press straight in until the latch clicks, then route the four SATA 7-pin tails toward the drives; the step often missed is confirming the left-angle points toward the chassis sidewall so cables clear adjacent cards.
No scheduled maintenance is required; inspect the latch tabs and SATA connectors during drive swaps — if any latch feels loose or a pin is bent, replace the entire 1 m assembly.
The four SATA 7-pin links each cap at 6 Gb/s, so aggregate throughput hits the SATA interface ceiling before the 30 AWG copper or shielding shows any degradation.
More in SAS, SCSI, InfiniBand & MCIO Cables
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?