SMUGDESK PCIe to 2-Port DB9 RS232 Serial Card AX99100
Adds two DB9 RS232 COM ports via one PCIe slot using the AX99100 chip for industrial serial devices
- Adds two DB9 RS232 COM ports via one PCIe slot
- AX99100 chip supports long-term continuous data transmission
- Standard RS232 protocol fits POS, PLC and serial debugging devices
- Fits PCIe x1, x4, x8 and x16 slots on desktop motherboards
- Drivers included for Windows and Linux systems
Dual-port serial card for industrial equipment
This PCIe expansion card adds two independent DB9 RS232 COM ports to a desktop computer. It uses the AX99100 control chip to maintain stable serial communication over long periods. The standard bracket fits PCIe x1, x4, x8 or x16 slots on most motherboards. Drivers are provided for Windows and Linux operating systems.
Suits technicians restoring legacy serial links
The card is built for engineers connecting POS terminals, PLCs, detection instruments or serial debuggers that still rely on RS232 signalling. It is not intended for users who need USB, parallel or Ethernet interfaces, nor for laptops or small-form-factor systems lacking a full-height PCIe slot.
AX99100 chip enables two 16-byte FIFO ports
Each DB9 port presents a 16-byte transmit and receive FIFO managed by the AX99100 controller, supporting standard RS232 voltage levels and baud rates up to 232 Kbps. This hardware buffering is the specification that determines whether the card can sustain continuous data streams without overrun errors.
How it compares
Measured against everything we stock in Interface & Card Adapters, at today’s prices. Recalculated every night.
- Price $23.99
- Pricier than about 57% of the 353 comparable items (median $21.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
No published specifications for this item yet.
Questions about this item
What PCIe slot size does this card need on my motherboard?
It fits any PCIe x1, x4, x8 or x16 slot on a standard desktop motherboard.
Will the AX99100 chip work with my older RS232 instruments?
The card uses standard RS232 protocol, matching POS terminals, PLCs and detection equipment.
How can I verify both COM ports are active after installing the driver?
Open Device Manager on Windows or check dmesg on Linux to see two new serial ports listed.
More in Interface & Card Adapters
Similar items
LORDWORLD PA19 M.2 NVMe to PCIe 5.0 x4 Data Adapter with Large Heatsink
Silverstone ECD01 USB 2.0 to dual RS232 data adapter
- ATX Mid Tower
LORDWORLD USB 3.1 Gen1 5Gbps Dual Type-A & Type-C PCIe Data Adapter uPD720201 Low Profile Bracket
WRIARICH PCI-E to Storage Adapter 4 Ports SATA 3.0 6Gbps Low Profile Bracket
- Black
- Black





