SMUGDESK PS/2 Splitter Cable 30cm
Connects a PS/2 keyboard and mouse to a single port using a 30cm Y splitter cable
- Connect keyboard and mouse through one PS/2 interface
- 30 cm cable keeps desktop and industrial setups tidy
- Standard PS/2 pinout ensures stable data transmission
- Molded connectors and durable jacket withstand daily plugging
- Works with legacy desktops, POS terminals and automation gear
PS/2 Y Splitter Cable 30cm
This PS/2 Y splitter cable features a 6 pin Mini DIN male connector splitting into two PS/2 female ports. It allows connection of both a PS/2 keyboard and PS/2 mouse to a single PS/2 interface on a computer or industrial host. The 30cm length avoids messy cable arrangement while meeting daily connection demands. Sturdy molded connectors and quality inner conductors maintain steady data communication.
Suited for legacy desktops
Builders working with older mainboards, POS terminals or automation equipment equipped with PS/2 ports will find this adapter practical. It is not intended for systems that lack a PS/2 interface or for users who require USB connectivity. Some motherboards may not support simultaneous operation of two devices via a PS/2 splitter, so device compatibility should be verified before purchase.
30cm compact length
The short cable reduces clutter and fits tight spaces inside industrial chassis or compact desktop cases. This dimension is the key factor when deciding whether the splitter will reach the intended peripherals without tension. No other specification overrides this physical constraint for installation planning.
How it compares
Measured against everything we stock in PS/2 to USB Adapters, at today’s prices. Recalculated every night.
- Price $13.99
- Cheaper than about 79% of the 115 comparable items (median $26.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
No published specifications for this item yet.
Questions about this item
How much clearance does the 30cm Y cable need behind the PC?
The 30cm length runs from the single PS/2 port to the split, so allow roughly 30cm of free space behind the chassis for the Y junction and the two peripheral cables.
Which connector goes in first when hooking up keyboard and mouse?
Plug the 6 pin Mini DIN male end into the host PS/2 port, then attach the keyboard and mouse to the two female ports; the order of the two peripherals does not matter.
How often should I replace the splitter if it sees daily industrial use?
The molded connectors and durable jacket are built for frequent plugging, so replace only when you notice intermittent signals or physical damage to the cable or pins.
More in PS/2 to USB Adapters
Similar items
STARTECH GC46FMKEY USB to PS/2 Keyboard Adapter
- USB to PS/2
- Connector Types 1 -…
Thermaltake Argent K6 RGB Low Profile Mechanical Gaming Keyboard Cherry MX Speed Silver 454 x 157 x 37.5 mm
No Sew DGM5185 PS/2 to USB Adapter Black
- Connecting PS/2 dev…
- Connecting PS/2 dev…





