Silverstone CPS05-RE SFF-8643 36-Pin to SATA 7-Pin x4 Sideband Cable 600mm
- SAS ports: 4
- SAS / SATA
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
Connects SFF-8087 Mini-SAS RAID or HBA controllers to 2.5 or 3.5 SATA HDDs and SSDs with 1 meter shielded, gold-plated cabling for stable high-speed data transfer
This SMUGDESK forward breakout cable connects a Mini-SAS RAID or HBA controller with an SFF-8087 port to up to four SATA hard drives or solid-state drives. It is built for internal storage expansion inside servers, NAS enclosures and surveillance recording systems requiring direct drive attachment.
Verify that your host controller card features an SFF-8087 Mini-SAS receptacle and supports forward breakout wiring to SATA targets. Confirm the target drives use standard SATA interfaces; this cable does not carry power, so each drive still requires a separate power connection from the system power supply.
Multi-layer shielding suppresses electromagnetic interference and signal crosstalk from adjacent components during 24/7 workloads. Gold-plated contact pins resist oxidation for reliable conductivity, while injection-molded connector shells reinforce the mating interface against vibration-induced disconnection. The 1 metre (3.3 feet) length allows tidy internal routing without restricting chassis airflow.
Measured against everything we stock in SAS, SCSI, InfiniBand & MCIO Cables, at today’s prices. Recalculated every night.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
No published specifications for this item yet.
The package contains the 1 meter SFF‑8087 to SATA forward breakout cable itself. No additional adapters or brackets are needed — the four SATA connectors plug directly into 2.5 or 3.5 inch SATA HDDs or SSDs.
This model is only offered in the 1 meter (3.3 ft) length with a standard SFF‑8087 Mini‑SAS plug on the host side and four SATA plugs on the drive side. If your backplane or controller uses a different Mini‑SAS pinout or you need a longer run, a different cable would be required.
The cable passes the native SATA 6 Gb/s signal from each drive to the controller without adding latency. Sustained read/write speeds will match the limits of the individual SATA SSDs and the RAID/HBA card, not the cable itself.
More in SAS, SCSI, InfiniBand & MCIO Cables
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?