Silverstone CPS05-RE SFF-8643 36-Pin to SATA 7-Pin x4 Sideband Cable 600mm
- SAS ports: 4
- SAS / SATA
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
Converts a SFF-8482 29Pin SAS interface to standard SATA 22Pin for connecting SATA drives to SAS controllers with integrated 4Pin Molex power
This SFF-8482 29Pin to SATA 22Pin cable connects a SAS controller to standard SATA hard drives or SSDs. A built-in 4Pin Molex power port supplies drive power directly from the PSU, removing the need for a separate SATA power lead. It is suited for RAID arrays, server rebuilds and DIY storage expansion using 2.5 or 3.5 inch SATA drives. The cable operates plug-and-play without extra drivers.
Verify that your host uses a SAS controller with an SFF-8482 port; this cable will not let SAS drives run on a regular SATA motherboard header. Ensure the target drives are SATA models in the 2.5 or 3.5 inch form factor and that a free 4Pin Molex connector is available from the power supply. The cable is designed for internal chassis routing, so confirm there is a clear path between the controller and drive bays.
The cable itself is passive and generates no heat or noise during operation. Power for the attached drive comes entirely through the 4Pin Molex connection from the system PSU, so total draw matches the drive’s own specification. High-quality insulated conductors keep signal loss low under continuous load, supporting stable data transfer in RAID and server environments. Cable routing can be arranged to maintain airflow inside the chassis.
Measured against everything we stock in SAS, SCSI, InfiniBand & MCIO Cables, at today’s prices. Recalculated every night.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
No published specifications for this item yet.
The cable has a built-in 4Pin Molex port so you plug a standard PSU Molex lead directly into it; no extra SATA power cable is required.
It works with both 2.5-inch and 3.5-inch SATA hard drives and SSDs when connected to a SAS controller.
It converts the SAS controller port to a standard SATA 22Pin connection so SATA drives can be used in the RAID array.
More in SAS, SCSI, InfiniBand & MCIO Cables
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?