Silverstone CPS05-RE SFF-8643 36-Pin to SATA 7-Pin x4 Sideband Cable 600mm
- SAS ports: 4
- SAS / SATA
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
Connects one SFF8643 host port to four SFF8482 drives with integrated 15pin power at 12Gb/s SAS 3.0 speed
This cable connects a single SFF8643 Mini SAS HD host port on a RAID controller or HBA to four SFF8482 29pin drive interfaces. It supports both SAS and SATA hard drives using the SAS 3.0 specification at up to 12Gb/s per channel. Backward compatibility extends to 6Gb/s and 3Gb/s devices. Each drive connector integrates 15pin power contacts so no separate SATA power cables are required for the attached drives.
Verify that your RAID adapter or HBA provides an SFF8643 Mini SAS HD port and that the card firmware supports the attached drive types. Ensure the server chassis has sufficient internal clearance for a 1meter shielded cable run from the controller to the drive bays. Confirm the drives use the 29pin SFF8482 interface; other connector styles will not mate. The host end is controlleroriented and must plug into the RAID card.
Replaces separate signal cables and individual SATA power cords with one integrated assembly, reducing internal clutter and potential failure points. The jump is worthwhile when consolidating four drive connections onto a single controller port while maintaining 12Gb/s bandwidth per channel. It also suits deployments needing 24hour operation where highdensity shielding helps prevent signal crosstalk under sustained load.
Measured against everything we stock in SAS, SCSI, InfiniBand & MCIO Cables, at today’s prices. Recalculated every night.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
No published specifications for this item yet.
Each SFF8482 connector carries integrated 15pin power contacts, so the single cable delivers both 12Gb/s SAS 3.0 signal and drive power without extra SATA power cords.
The cable runs at 12Gb/s per channel and is backward compatible with 6Gb/s and 3Gb/s SAS and SATA drives, so one cable covers all three speed generations.
The shielded 1meter design with tinned copper conductors maintains stable 12Gb/s throughput per channel under continuous heavy load while suppressing electromagnetic interference and crosstalk.
More in SAS, SCSI, InfiniBand & MCIO Cables
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?