Silverstone CPS05-RE SFF-8643 36-Pin to SATA 7-Pin x4 Sideband Cable 600mm
- SAS ports: 4
- SAS / SATA
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
An 80 cm internal cable linking SFF-8654 38-pin SlimSAS to SFF-8643 36-pin MiniSAS HD, supporting PCIe 4.0 and SAS 3.0 for high-speed server storage
This 80 cm cable bridges a SlimSAS 4X SFF‑8654 38‑pin port to a MiniSAS HD SFF‑8643 36‑pin connector. It is built for server and storage integrators who need a direct internal link between RAID controllers, motherboards or expansion cards and drive backplanes. Gold‑plated contacts and multilayer shielding preserve signal integrity at high speeds. No drivers are required for installation.
Confirm that your controller or motherboard provides a SlimSAS 4X SFF‑8654 38‑pin receptacle and that the target backplane or enclosure uses a MiniSAS HD SFF‑8643 36‑pin socket. Check that the 80 cm length suits the routing path inside your chassis without excessive tension or sharp bends. Ensure the protocol stack on both ends supports the same PCIe or SAS generation for the desired throughput.
This assembly supersedes older wide‑port SCSI or first‑generation MiniSAS links when moving to SlimSAS 4X density on the host side. The jump is worthwhile when upgrading a backplane to a newer controller that only offers SFF‑8654 ports, or when consolidating cabling in a rackmount build that demands higher lane counts per connector. It does not add lanes beyond the four‑lane 4X configuration.
Measured against everything we stock in SAS, SCSI, InfiniBand & MCIO Cables, at today’s prices. Recalculated every night.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
No published specifications for this item yet.
The cable has a SlimSAS 4X SFF8654 38pin connector on one end and a MiniSAS HD SFF8643 36pin connector on the other; no additional adapters are required for direct connection.
It is fully compliant with PCIe Gen4.0 and SAS3.0, so select it when your controller or backplane specifies either of those protocol generations.
The 80cm shielded design maintains PCIe Gen4.0 and SAS3.0 signal integrity, reducing crosstalk and electromagnetic interference for stable highspeed storage transmission in tight rackmount spaces.
More in SAS, SCSI, InfiniBand & MCIO Cables
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?