Silverstone CPS05-RE SFF-8643 36-Pin to SATA 7-Pin x4 Sideband Cable 600mm
- SAS ports: 4
- SAS / SATA
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
Splits one SFF-8654 8i port into two SFF-8654 4i ports for PCIe 4.0 and SAS 4.0 at 24Gbps per lane with 85-ohm impedance
This 1-metre internal cable splits a single SFF-8654 8i port into two independent SFF-8654 4i connections. It is built for enterprise servers, NAS arrays and high-performance workstations that need to distribute PCIe 4.0 or SAS 4.0 bandwidth to dual NVMe U.2 backplanes, HBA cards or SSD modules. The design targets administrators who require reliable lane splitting in compact chassis.
An 85-ohm differential impedance suppresses crosstalk and signal distortion at full 24 Gbps per lane. A flexible braided sleeve protects the conductors during routing inside 1U and 2U racks. Gold-plated SlimSAS connectors with latch locks resist vibration-induced disconnects, supporting continuous data-centre operation without signal degradation.
Confirm the host side exposes an SFF-8654 8i interface and each target device accepts an SFF-8654 4i link. The cable is backward compatible with PCIe 3.0 and SAS 3.0 protocols, but connected hardware must negotiate the appropriate lane count. Buyers who need a straight-through 8i-to-8i link or a different breakout ratio should select an alternative cable.
Measured against everything we stock in SAS, SCSI, InfiniBand & MCIO Cables, at today’s prices. Recalculated every night.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
No published specifications for this item yet.
The cable follows PCIe 4.0 and SAS 4.0 standards, supporting up to 24Gbps per lane for lossless data transmission. It is backward compatible with PCIe 3.0 and SAS 3.0 protocols.
The cable measures 1 meter (3.3ft) total length with a flexible braided shielding sleeve designed for neat routing inside 1U/2U rack servers and storage enclosures. Latch-locked SFF-8654 connectors need enough clearance for the locking mechanism to engage fully.
Align each gold-plated SFF-8654 connector with its port and press firmly until the integrated latch clicks into place, locking the connector. The step often missed is verifying the latch is fully engaged on both 4i ends and the 8i host end to prevent vibration-induced disconnection.
More in SAS, SCSI, InfiniBand & MCIO Cables
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?