SMUGDESK USB 3.0 to SATA 3 Adapter Cable
Connects 2.5 and 3.5 SATA drives via USB 3.0 for backup, recovery and migration
- Fast SATA III data transfer speeds
- Connect 2.5 and 3.5 inch SATA drives via USB
- USB 3.0 port works with USB 2.0 and 1.1
- Plug-and-play turns internal drives into external storage
- Compact adapter for backup, recovery and disk testing
USB 3.0 to SATA 3 adapter
This USB 3.0 to SATA 3 adapter cable connects standard SATA hard drives to a computer via USB port. It allows quick access to data on idle 2.5-inch and 3.5-inch SATA disks without a drive enclosure. The adapter is designed for IT technicians and office workers who need a portable tool for drive conversion.
Sustained transfer over USB 3.0
Compliant with the SATA III specification, the adapter supports high-speed data transmission through its USB 3.0 interface. It remains backward compatible with USB 2.0 and USB 1.1 ports for flexible use across different systems. Actual throughput during long sessions depends on the connected drive and the host USB controller performance.
Power limits for 3.5-inch drives
The listing includes the adapter only and does not supply external power. For 3.5-inch mechanical hard drives, an extra external power supply is required to operate the disk normally. Without that additional power, 3.5-inch drives will not spin up, while 2.5-inch drives typically draw enough current from the USB port alone.
How it compares
Measured against everything we stock in SATA & eSATA Drive Cables, at today’s prices. Recalculated every night.
- Price $12.99
- Cheaper than about 55% of the 1,954 comparable items (median $13.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
No published specifications for this item yet.
Questions about this item
How much power does the adapter itself draw when running all day?
The adapter draws minimal power from the USB port; for 3.5-inch mechanical drives an external power supply is required to operate the disk normally.
What must I already own to use this with a 3.5-inch desktop drive?
You need a separate external power supply for 3.5-inch mechanical hard drives, plus a USB 3.0 or 2.0 port on your computer.
Will this work with my older laptop that only has USB 2.0 ports?
Yes, the USB 3.0 interface is backward compatible with USB 2.0 and 1.1, so the adapter will function at the slower USB 2.0 speed.
More in SATA & eSATA Drive Cables
Similar items
Nippon Labs SATA-0.5RR 0.5m SATA cable right-angle pair
- 1.64 ft (0.5m)
- SATA II
Nippon Labs SATA-1MR 1m right-angle SATA cable
- 3.28 ft (1m)
- SATA
STARTECH SATA36RA1 36in Right-Angle SATA Cable
- Cable Connectors
- Red
COMeap SATA power cable 6 pin to 3×15 pin 20 in 50 cm
- 6 Pin, Sata 15 Pin
- SATA





