SMUGDESK USB 3.1 Type-C to SATA Adapter Cable 2.5
Connects a 2.5-inch SATA SSD or HDD to a USB-C port for portable storage without an external power supply
- Turn any 2.5" SATA drive into portable storage
- USB 3.1 speeds deliver fast file transfers and backups
- No external power needed for standard 2.5" SATA drives
- Plug and play on PC, laptop and USB-C devices
- Compact cable design simplifies portable storage builds
USB-C to 2.5 SATA adapter
This USB 3.1 Type-C to SATA adapter cable converts an internal 2.5-inch SATA hard drive or SSD into a portable external drive. It connects the storage device directly to computers and notebooks with Type-C ports. The EasyDrive wiring design draws power from the USB-C bus, so no external power adapter is required for standard 2.5-inch drives. Plug-and-play operation works without driver installation on mainstream operating systems.
Suits portable storage and data recovery
The compact cable is built for users who need quick access to bare 2.5-inch SATA drives for file transfer, video storage or backup tasks. It is not suited for 3.5-inch desktop hard drives, which demand extra power the adapter cannot supply. Buyers wanting to connect M.2 or PCIe-based drives should look at a different interface solution.
2.5-inch SATA drive support only
This adapter works exclusively with 2.5-inch SATA hard drives and SSDs. It cannot power or communicate with 3.5-inch SATA drives. The single specification that decides compatibility is the physical drive size and SATA interface.
How it compares
Measured against everything we stock in SATA & eSATA Drive Cables, at today’s prices. Recalculated every night.
- Price $12.99
- Cheaper than about 55% of the 1,954 comparable items (median $13.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
No published specifications for this item yet.
Questions about this item
Does this adapter fit a 2.5-inch SATA drive without a separate power supply?
Yes, the EasyDrive wiring design powers standard 2.5-inch SATA SSDs and HDDs directly from the USB-C port, so no external adapter is required.
What is the correct order to connect the cable for it to be recognised?
Attach the SATA connector to the drive first, then plug the USB-C end into the computer; reversing the order can prevent the drive from appearing.
Will I need to replace this cable if I later use a 3.5-inch desktop drive?
Yes, 3.5-inch drives need more power than the USB-C port can supply, so a different adapter with its own power source would be necessary.
More in SATA & eSATA Drive Cables
Similar items
Nippon Labs SATA-0.5RR 0.5m SATA cable right-angle pair
- 1.64 ft (0.5m)
- SATA II
Nippon Labs SATA-1MR 1m right-angle SATA cable
- 3.28 ft (1m)
- SATA
STARTECH SATA36RA1 36in Right-Angle SATA Cable
- Cable Connectors
- Red
COMeap SATA power cable 6 pin to 3×15 pin 20 in 50 cm
- 6 Pin, Sata 15 Pin
- SATA





