Solidigm D3-S4520 240GB M.2 2280 SATA enterprise SSD SSDSCKKB240GZ01
Enterprise 240 GB SATA M.2 2280 SSD with 144L TLC 3D NAND, 2,000,000-hour MTBF and end-to-end data protection for server continuity
- Total capacity240 GB
- Interface typeSATA III
- Form factorM.2 2280
- NAND flash type144L TLC 3D NAND
- Mean time between failures2,000,000 h
- Operating temperature range0 °C to 70 °C
- Enterprise reliability with 2,000,000 hours MTBF rating
- End-to-end data protection guards against sudden power loss
- 9x lower annualised failure rate reduces drive replacements
- Firmware updates complete without server reset cutting downtime
- M.2 2280 form factor fits dense server configurations
Solidigm D3-S4520 240GB SATA SSD
The Solidigm D3-S4520 is a 240GB enterprise solid-state drive built for data-centre servers. It uses a SATA III interface in an M.2 2280 form factor with 144L TLC 3D NAND. The drive targets workloads that demand consistent uptime and data integrity over raw capacity or peak throughput.
Suited for arrays needing endurance
This drive fits administrators who prioritise a 2,000,000-hour MTBF and firmware updates without a server reset. It operates from 0°C to 70°C and tolerates 1,000 G shock. Buyers who need larger capacities or a PCIe interface should consider other models.
SATA III interface dictates host compatibility
The single specification that decides fit is the SATA III interface. The motherboard or backplane must provide a SATA-connected M.2 slot; a PCIe-only M.2 slot will not work. Verify the host connector type before purchase.
How it compares
Measured against everything we stock in Server & Data Center SSDs, at today’s prices. Recalculated every night.
- Price $818.99
- Cheaper than about 56% of the 1,039 comparable items (median $992.99).
- Total capacity 240 GB
- Lower than about 95% of the 522 comparable items (median 3.2 TB).
- Price per TB $3,412.46 per TB
- Pricier than about 91% of the 522 comparable items (median $595.64 per TB).
New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.
Specifications
| Product | |
|---|---|
| Brand name | Solidigm |
| Product line | D3-S4520 |
| Model name | D3-S4520 |
| Total capacity | 240 GB |
| Storage | |
| NAND flash type | 144L TLC 3D NAND |
| Ports & slots | |
| Interface type | SATA III |
| Size & build | |
| Form factor | M.2 2280 |
| Shipping weight | 0.45 kg |
| Package size | 203 × 152 × 127 mm |
| Environment & compliance | |
| Operating temperature range | 0 °C to 70 °C |
| Max shock tolerance | 1,000 G (Max) at 0.5 msec |
| Vibration tolerance | Operating: 2.17 GRMS (5–700 Hz) Max Non-Operating: 3.13 GRMS (5–800 Hz) Max |
| More details | |
| Mean time between failures | 2,000,000 h |
Questions about this item
How do I install this M.2 2280 SATA SSD in a server and what step is often missed?
Insert the drive into an M.2 slot wired for SATA at a 20-degree angle, then secure it with the screw; the common mistake is using a slot that only supports PCIe, which will not detect the drive.
What maintenance or replacement will the 144L TLC 3D NAND need over its service life?
The 144L TLC 3D NAND has a finite write endurance; plan to replace the drive once its SMART media-wear indicator approaches the rated limit to avoid unexpected failure.
What limit appears first on this SSD during sustained heavy writes?
The SATA III interface caps sequential throughput at 6 Gb/s, so the bus saturates before the 144L TLC 3D NAND or thermal throttling at 70°C becomes the bottleneck.
More in Server & Data Center SSDs
Similar items
Intel D3-S4510 3.84TB 2.5" SATA Enterprise SSD SSDSC2KB038T801
- 3.84 TB
- 2.5 in (6.35 cm)
HPE P40504-B21 1.92 TB 2.5" SATA enterprise SSD
- 1.92 TB
- SATA III
Solidigm D5-P5336 122.88TB E1.L 9.5mm PCIe 4.0 x4 enterprise SSD SBFPFWBV0P12OF1
- 122.88 TB
- E1.L 9.5 mm
Solidigm D3-S4520 480GB 2.5" SATA enterprise SSD SSDSC2KB480GZ01
- 480 GB
- 2.5 in (6.35 cm)





