Battery Technology Inc. ET-LAD60W-BTI projector lamp 330 Watt 2000 Hrs
- 330 W
- 2,000 Hrs.
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
A 330 W UHP replacement lamp module with pre-assembled housing for straightforward installation in a Sony VPL-VW1000 projector
This OEM replacement lamp module is built for the Sony VPL-VW1000 projector and arrives as a fully assembled bulb and housing. It uses a genuine Philips UHP bulb rated at 330 W, matching the original light source specification. The unit is ready to install without any additional assembly, making it suitable for owners who need a straightforward swap when the existing lamp reaches end of life.
Each module is produced to ISO9001 quality standards and tested for beam performance, ignition, voltage, connections and run-time before it ships. The complete housing means the bulb is already secured in its carrier, so installation only requires opening the projector’s lamp door, removing the old module and sliding the new one into place. No wiring, alignment tools or separate bulb handling are involved.
Before ordering, verify that your projector is the Sony VPL-VW1000; other Sony models use different lamp modules and this unit will not fit them. Check the existing lamp’s part number, typically LMP-H330, to be certain of compatibility. Ensure the projector is powered off and cooled down before starting the replacement, and allow the new lamp to stabilise after installation.
Measured against everything we stock in Replacement Projector Bulbs, at today’s prices. Recalculated every night.
New to this? Buying a printer and toner with crypto — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | Sony |
| Product type | UHP |
| Power | |
| Power rating | 330 W |
The lamp draws 330 watts, which defines the maximum light output the VPL-VW1000 can produce; actual brightness depends on the projector's optical engine and selected mode.
The module ships as a fully assembled unit with a new Philips UHP 330W bulb already seated in its housing, matching the original LMP-H330 form factor for direct fitment.
Power off and cool the projector, remove the lamp cover, release the retaining screws, slide out the old module, insert the new one until it seats firmly, re-tighten the screws, replace the cover, then reset the lamp timer in the menu — the timer reset is the step most frequently forgotten.
More in Replacement Projector Bulbs
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?