Battery Technology Inc. ET-LAD60W-BTI projector lamp 330 Watt 2000 Hrs
- 330 W
- 2,000 Hrs.
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
Genuine compatible 200 W replacement lamp module with 2,000-hour UHP bulb and housing for Sony VPL-VW80 projectors
The Sony VPL-VW80 replacement lamp arrives as a fully assembled 200W UHP bulb inside its housing, so it fits straight into the projector without extra steps. It is built for owners of the VPL-VW80 who need a new light source after the original reaches its rated life.
Each unit is produced to ISO9001 quality standards using bulbs from Philips, Osram, Ushio, Phoenix, Iwasaki or Matsushita, and every lamp is tested for beam performance, ignition, voltage, appearance, connections and run-time. The pre-fitted housing means alignment is fixed at the factory, removing the risk of mis-seated bulbs during a home swap.
The lamp is rated for 2000 hours of operation, after which brightness and colour stability will gradually decline and a further replacement will be needed. It is not suited for users who require longer intervals between changes or who run their projector continuously for extended periods.
Measured against everything we stock in Replacement Projector Bulbs, at today’s prices. Recalculated every night.
New to this? Buying a printer and toner with crypto — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | Sony |
| Product type | Projector Lamp |
| Display | |
| Lamp lifespan | 2,000 Hrs. |
| Power | |
| Power rating | 200 W |
The LMPH201 module is built for the Sony VPL-VW80 projector and includes the 200W UHP bulb pre-assembled in its housing.
The housing matches the original VPL-VW80 lamp cage dimensions and screws into the same mounting points without modification.
Power off and cool the projector, remove the lamp cover, release the retaining screws, slide the module in until it seats firmly, re-tighten the screws, replace the cover, then reset the lamp timer in the menu.
More in Replacement Projector Bulbs
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?