Silverstone CPS05-RE SFF-8643 36-Pin to SATA 7-Pin x4 Sideband Cable 600mm
- SAS ports: 4
- SAS / SATA
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
Connects a Mini SAS backplane to four SATA drives using a 19.7-inch SFF-8087 to 4x SATA fan-out cable
This 19.7-inch fan-out cable bridges a single 36-pin SFF-8087 Mini SAS port to four SATA 3.0 connectors. It lets system builders attach up to four SATA hard drives or solid-state drives to a SAS or SATA RAID controller or motherboard header. The red jacket makes the cable easy to trace inside a dense chassis. The 50 cm length suits compact server and workstation enclosures.
The male Mini SAS plug inserts directly into a backplane or controller header without an adapter, while each female SATA receptacle accepts a standard 7-pin data cable. This layout frees the builder from hunting for a multi-lane backplane that matches the controller pin-out. The reverse orientation eases routing when the controller sits above the drive cage. No external power or active electronics are required for the connection.
The package supplies only the fan-out cable itself, so existing SATA data cables and drive-power leads remain the installer's responsibility. Because the assembly carries no firmware or configuration utility, it adds no software layer to the storage stack. The straightforward pin-to-pin mapping means the operating system sees each attached drive exactly as if it were plugged into a native SATA port.
Measured against everything we stock in SAS, SCSI, InfiniBand & MCIO Cables, at today’s prices. Recalculated every night.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | StarTech.com |
| Model name | SAS8087S4R50 |
| Product type | Cable Connectors |
| Product color | Red |
| Ports & slots | |
| Connector count | 5 |
| Connector details | Connector A: 1 - SFF-8087 (36 Pin; Internal Mini-SAS) Plug Connector B: 4 - SATA (7 pin; Data) Receptacle |
| Size & build | |
| Overall length | 0.5 ft (0.15 m) |
| Shipping weight | 0.05 kg |
| Package size | 128 × 121 × 27 mm |
The cable is specified for SATA III at 6 Gbps per lane, so each of the four SATA connections can sustain up to that rate.
The short 1.6 ft length and standard jacket add negligible resistance; heat is determined by the drives and controller, not the cable itself.
You need a 36-pin SFF-8087 Mini-SAS receptacle on your RAID controller, motherboard or backplane for the plug to connect.
More in SAS, SCSI, InfiniBand & MCIO Cables
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?