STARTECH SATA24RA1 24in Right Angle SATA Cable
- 2 ft (0.61 m)
- Others
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
Right-angled SATA data cable with 26 AWG conductors fits 2.5" and 3.5" drives in tight spaces
Cable Length 6 in.
This six-inch SATA data cable uses a straight connector on one end and a right-angle connector on the other to fit drives where a straight plug would hit a case wall or another component. The 26 AWG conductors and aluminium-Mylar foil with braid shielding meet Serial ATA III specifications for reliable 6 Gbps transfer rates. Red PVC jacket adds visibility during cable routing.
Swap this cable in when a drive sits flush against a side panel, a long graphics card or a drive cage that leaves no room for a straight connector hood. The right-angle head removes the clearance problem without needing an adapter that adds another failure point. Builders with generous space around every SATA port will not need the angled design.
The 152.4 mm length reaches from a motherboard port to a 2.5 or 3.5 inch drive mounted in a tight bay while keeping slack minimal for airflow. Seven conductors carry the full SATA III signal set. The short reach cannot span full-tower distances or connect drives mounted far from the board; longer cables are required for those layouts.
Measured against everything we stock in SATA & eSATA Drive Cables, at today’s prices. Recalculated every night.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | StarTech.com |
| Model name | SATA6RA1 |
| Product type | Cable Connectors |
| Product color | Red |
| Ports & slots | |
| Connector count | 2 |
| Connector details | Connector A: 1 - SATA (7 pin; Data) Receptacle Connector B: 1 - SATA (7 pin; Data) Receptacle |
| Size & build | |
| Overall length | 6 in [152.4 mm] |
| Cable length | 6 in (15.2 cm) |
| Shipping weight | 0.01 kg |
| Package size | 169 × 121 × 24 mm |
Other versions of this model
The right-angle connector bends at the drive port so the cable runs parallel to the drive, letting you route it in the narrow gap between the drive and the case wall.
Connect the straight end to the motherboard or controller first, then angle the right-angle end onto the drive SATA port; reversing the order can make the bend fight the limited space.
Replace it if the PVC jacket shows cracks, the foil-and-braid shield is exposed, or the 7-pin connectors feel loose and cause intermittent 6 Gbps link errors.
More in SATA & eSATA Drive Cables
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?