Lian Li UNI Fan TL LCD Wireless 140mm Reverse Blade case fan 14RTLLCD1W1B
- 140 mm
- Fluid Dynamic
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
A 60 mm hydraulic-bearing case fan running up to 1600 RPM at 24 V with a two-wire connector
The SunnyStar 0610-24V is a 60 by 60 by 10 mm case fan that runs on 24 V DC and draws 0.08 A. It uses a hydraulic bearing and spins below 1600 RPM to produce 20 to 25 dBA of noise. The two-wire power connector supplies voltage only, so speed control or monitoring is not available. It suits tight enclosures such as routers, switches or small-form-factor PCs that provide a 24 V fan header.
The hydraulic bearing reduces friction for quieter operation at the rated speed range. Because the fan has only two wires, it cannot report RPM to the motherboard and will not respond to PWM signals; voltage regulation is the only way to adjust speed. No LED lighting or extra cables are included, keeping the assembly simple for embedded or industrial use.
Verify that your device supplies a 24 V DC fan header with a matching two-pin connector before ordering. The 60 mm square frame uses standard mounting-hole spacing, but confirm the clearance around the 10 mm thickness in your chassis. Ensure the 0.08 A current draw is within the header’s rated limit to avoid overload.
Measured against everything we stock in PC Cooling Fans, at today’s prices. Recalculated every night.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Product line | 0610-24 V |
| Model name | 0610-24 V |
| Product type | Case Fan |
| Product color | Black |
| Performance | |
| Rotational speed | <1,600 RPM |
| Power | |
| Power input connector | 2 Wires |
| Size & build | |
| Bearing design | Hydraulic |
| Product dimensions | 60 × 60 × 10 mm |
| Environment & compliance | |
| Operating noise | 20–25 dBA |
| More details | |
| LED lighting | Non-LED |
Hydraulic bearings are sealed and do not require routine cleaning; replacement is only needed if noise or vibration increases after extended use.
The fan is rated for speeds under 1600 RPM, so sustained operation will hit that RPM ceiling before any thermal or current limit is reached.
At full speed it produces 20 to 25 dBA of noise, and the motor converts its electrical input into a small amount of waste heat inside the chassis.
More in PC Cooling Fans
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?