SunnyStar Co., Ltd TDM400P 1FXS 3FXO VoIP PCI 2.2 card
Four-port PCI 2.2 card adds one FXS and three FXO analog interfaces for Asterisk-based telephony systems
- Port count4
- Product typeWired VoIP
- Four-port analog telephony card for open-source PBX
- Half-length PCI 2.2 interface fits standard slots
- One FXS port connects analog handsets directly
- Three FXO ports link to POTS lines
- Dahdi/Zaptel driver support for Asterisk and Elastix
SunnyStar TDM400P VoIP PCI 2.2 Card
The SunnyStar TDM400P is a half-length PCI 2.2-compliant card that provides one FXS and three FXO ports for connecting analog telephones and POTS lines to a PC. It targets small-office or home-office builders who want to deploy an Asterisk, TrixBox or Elastix telephony platform using open-source software. The four-port design fits a single expansion slot and uses standard Dahdi or Zaptel drivers for immediate compatibility.
Sustained Load Behaviour
Under continuous call traffic the card handles analog signalling and voice channels through its onboard modules without requiring active cooling. Driver stability relies on the mature Dahdi/Zaptel stack used by Asterisk-based distributions, so long-duration sessions remain consistent with typical PBX workloads. No thermal throttling or firmware throttling mechanisms are documented for this hardware.
Pre-Installation Checks
Verify that your motherboard has an available half-length PCI 2.2 slot and that the chassis can accommodate a low-profile bracket. Confirm your chosen PBX distribution includes Dahdi or Zaptel kernel modules for the TDM400 series. Buyers who need more than four analog ports or digital trunk interfaces such as T1/E1 will need additional or different hardware.
How it compares
Measured against everything we stock in IP Phones & VoIP Handsets, at today’s prices. Recalculated every night.
- Price $50.99
- Cheaper than about 82% of the 491 comparable items (median $137.99).
New to this? Buying a printer and toner with crypto — what to check, what it costs to pay, and what is never asked for.
Specifications
| Product | |
|---|---|
| Model name | TDM400 |
| Product type | Wired VoIP |
| Ports & slots | |
| Port count | 4 |
Questions about this item
How much power does the TDM400P draw from the PCI 2.2 slot when running continuously?
The card is a half-length PCI 2.2-compliant device with no active cooling, so it draws only the minimal current the slot provides for its four analog modules.
What software and drivers must already be installed on the PC for the TDM400P to work?
You need a Linux-based PBX such as Asterisk, TrixBox or Elastix with DAHDI or Zaptel drivers loaded before inserting the card.
Will the TDM400P coexist with an older Digium analog card in the same server?
Yes, the TDM400P is fully compatible with all analog Digium cards and modules and uses the same DAHDI/Zaptel drivers without changes.
More in IP Phones & VoIP Handsets
Similar items
Grandstream DP720 DECT cordless VoIP handset
- Office Products
- t Handset unit, uni…
Yealink Network Technology Co., Ltd SIP-T54W VoIP 4.3" 10 line keys 16 SIP accounts 27 memory keys
- Wireless VoIP
- Mid-level phone, id…
ADTRAN 4243924F1 Total Access 924e VoIP Gateway 24 FXS 3 RJ-45 1U
- VoIP Gateway
Valcom, Inc VP-624D VoIP Power Supply 24V 600mA
- Consumer Electronics





