Supermicro SYS-6018U-TR4T+ 1U rack server 2× Xeon E5-2697 v4 2.3GHz 18C 32GB DDR4 4×3.5" 9361-8i X540 2×750W
1U rack server with dual 18-core Xeon E5-2697 v4 processors, 32GB DDR4, MegaRAID 9361-8i controller, four 3.5-inch hot-swap bays and quad 10GBase-T Ethernet
- ProcessorIntel Xeon
- Installed RAM32 GB
- Video RAM8 MB
- Installed SSDNo
- Processor core count18-Core Processor
- Processor socketLGA 2011-3
- Dual 18-core Xeon CPUs at 2.3 GHz turbo to 3.6 GHz
- 32 GB DDR4 ECC memory across 4 modules ready for expansion
- MegaRAID 9361-8i with 1 GB cache supports RAID 0/1/5/6/10/50/60
- Four 10GBase-T ports via Intel X540 for high-speed networking
- Redundant 750 W platinum power supplies with hot-swap capability
Dual-socket 1U rack server for virtualization
The Supermicro SYS-6018U-TR4T+ fits a standard 1U rack space and ships with two Xeon E5-2697 v4 processors, each running 18 cores at 2.3 GHz. It includes 32 GB of DDR4 ECC memory across four modules and a MegaRAID 9361-8i controller that supports RAID 0, 1, 5, 6, 10, 50 and 60. Four 3.5-inch hot-plug bays accept SATA or SAS drives, and quad 10GBase-T ports handle high-throughput networking.
Installation notes and common pitfalls
The chassis uses the CSE-819U platform with the X10DRU-i+ motherboard, so CPU coolers and memory must match the LGA 2011-3 socket and registered DDR4 specification. Rack rails and the front bezel are not included, so plan to supply compatible sliding rails for the target cabinet. The 9361-8i card occupies a PCIe slot; verify cable routing to the backplane before closing the lid. Dual 750 W platinum power supplies are hot-swap redundant, but each unit needs its own PDU circuit for full resilience.
Not for buyers who need more internal drive bays
This configuration provides only four 3.5-inch bays, so workloads that require ten or more spindles will need an external JBOD or a different chassis. The on-board Matrox G200 graphics with 8 MB video memory is strictly for console output and cannot accelerate compute or rendering tasks. Memory capacity is currently 32 GB; the board supports up to 1.5 TB, but additional DIMMs are not included. No solid-state drives are installed.
How it compares
Measured against everything we stock in Rack & Tower Servers, at today’s prices. Recalculated every night.
- Price $435.99
- Cheaper than about 93% of the 17,640 comparable items (median $1,910.99).
- Installed RAM 32 GB
- Lower than about 80% of the 15,103 comparable items (median 128 GB).
- Video RAM 8 MB
- Typical for this category: the median of 8,309 items is 0.01 GB.
New to this? Buying server hardware with crypto — what to check, what it costs to pay, and what is never asked for.
Specifications
| Product | |
|---|---|
| Brand name | SUPERMICRO |
| Product line | CSE-819U + X10DRU-i+ |
| Model name | SYS-6018U-TR4T+ |
| Processor | |
| Processor | Intel Xeon |
| Processor core count | 18-Core Processor |
| Processor socket | LGA 2011-3 |
| Processor speed | 2.3 GHz |
| Installed CPUs | E5-2697 V4 |
| Memory | |
| Installed RAM | 32 GB |
| Storage | |
| Installed SSD | No |
| Disk controller | LSI MegaRAID 9361-8i Controller |
| Drive interface | SATA/SAS |
| Supported RAID levels | RAID 0/1/5/6/10/50/60 |
| Graphics | |
| Video RAM | 8 MB |
| Graphics chip | Matrox G200 |
| Connectivity | |
| Network controller | Supermicro AOC-UR-i4XT - Intel X540–4x RJ45 10GBase-T Ports |
| Ports & slots | |
| Management interface | RJ 45 |
| Power | |
| Hot-swap redundant PSU | Yes |
| Size & build | |
| Rack height | 1U |
Questions about this item
How do I confirm the dual Xeon E5-2697 v4 CPUs and 32GB DDR4 are detected after powering on the SYS-6018U-TR4T+?
Log into the IPMI 2.0 web interface via the dedicated RJ45 management port; the System Information page shows both 18-core processors at 2.3GHz and all 32GB of registered ECC memory.
What ships with the SYS-6018U-TR4T+ and what must I source separately?
Included: chassis CSE-819U with motherboard X10DRU-i+, two Xeon E5-2697 v4 CPUs, four 8GB DDR4-2400 DIMMs, MegaRAID 9361-8i with 1GB cache and battery, AOC-UR-i4XT quad 10GBase-T card, four 3.5″ hot-plug trays, two 750W platinum PSUs. Not included: 3.5″ SAS/SATA drives, front bezel, rack-mount rails.
Which drive capacity should I choose for the four 3.5″ bays behind the 9361-8i controller?
The 9361-8i supports RAID 0/1/5/6/10/50/60 across four 3.5″ SAS or SATA drives; match capacity to your usable-space and redundancy target — for example, four identical drives in RAID 10 gives half the raw total with two-drive fault tolerance.
More in Rack & Tower Servers
Similar items
DELL PowerEdge R730XD 2U rack server E5-2650 v3 10-core 2.3GHz 16GB DDR4 3x 300GB SAS H730
- 2U
- Rack





