Supermicro SYS-6018U-TR4T+ 1U rack server dual Xeon E5-2690 v4 768GB DDR4
A 1U rack server with dual 14-core Xeon processors at 2.6GHz, 768GB DDR4 ECC memory, quad 10GBase-T ports, hardware RAID controller, and four hot-swap 3.5-inch drive bays
- ProcessorIntel Xeon
- Installed RAM768 GB
- Video RAM8 MB
- Installed SSDNo
- Processor core count14-Core Processor
- Processor socketLGA 2011-3
- Dual Xeon E5-2690 v4 14-core CPUs deliver 2.6GHz base speed
- 768GB DDR4 2400MHz registered ECC memory across 24 DIMM slots
- MegaRAID 9361-8i controller supports RAID 0/1/5/6/10/50/60 with 1GB cache
- Quad 10GBase-T RJ45 ports via Intel X540 for high-speed networking
- Redundant 750W platinum power supplies with hot-swap capability
Dense 1U dual-Xeon compute node
The Supermicro SYS-6018U-TR4T+ packs two 14-core Xeon E5-2690 v4 processors at 2.6 GHz and 768 GB of DDR4 2400 MHz ECC memory into a single rack unit. Redundant 750 W platinum power supplies and IPMI 2.0 with dedicated LAN keep the platform running under continuous load.
Suits memory-heavy multi-threaded tasks.
Dual 10 GbE RJ45 ports and the Matrox G200 graphics core make this system a natural fit for dense compute clusters and storage-heavy virtualization hosts. The 1U height leaves no room for full-height accelerator cards, so workloads needing GPU throughput should look elsewhere.
768 GB DDR4 ECC in 24 slots decides capacity ceiling
Twenty-four populated DIMM slots deliver 768 GB of registered ECC memory today, with the X10DRU-i+ board supporting up to 1.5 TB total. Buyers whose working set exceeds that ceiling must choose a platform with more memory channels or higher-density modules.
How it compares
Measured against everything we stock in Rack & Tower Servers, at today’s prices. Recalculated every night.
- Price $2,605.99
- Pricier than about 61% of the 17,640 comparable items (median $1,910.99).
- Installed RAM 768 GB
- Higher than about 90% of the 15,103 comparable items (median 128 GB).
- Video RAM 8 MB
- Typical for this category: the median of 8,309 items is 0.01 GB.
New to this? Buying server hardware with crypto — what to check, what it costs to pay, and what is never asked for.
Specifications
| Product | |
|---|---|
| Brand name | SUPERMICRO |
| Product line | CSE-819U + X10DRU-i+ |
| Model name | SYS-6018U-TR4T+ |
| Processor | |
| Processor | Intel Xeon |
| Processor core count | 14-Core Processor |
| Processor socket | LGA 2011-3 |
| Processor speed | 2.6 GHz |
| Installed CPUs | E5-2690 V4 |
| Memory | |
| Installed RAM | 768 GB |
| Storage | |
| Installed SSD | No |
| Disk controller | LSI MegaRAID 9361-8i Controller |
| Drive interface | SATA/SAS |
| Supported RAID levels | RAID 0/1/5/6/10/50/60 |
| Graphics | |
| Video RAM | 8 MB |
| Graphics chip | Matrox G200 |
| Connectivity | |
| Network controller | Supermicro AOC-UR-i4XT - Intel X540–4x RJ45 10GBase-T Ports |
| Ports & slots | |
| Management interface | RJ 45 |
| Power | |
| Hot-swap redundant PSU | Yes |
| Size & build | |
| Rack height | 1U |
Questions about this item
How do I confirm the dual Xeon E5-2690 v4 CPUs and 768GB DDR4 memory are detected after installation?
Enter the BIOS or IPMI 2.0 interface to verify both 14-core processors and all 24 DIMM slots show 32GB modules at 2400MHz.
Which components are included and which drives must be purchased separately?
The system includes two CPUs, 768GB memory, MegaRAID 9361-8i controller, four 3.5-inch hot-plug trays, quad 10GBase-T ports, IPMI 2.0, and dual 750W PSUs; hard drives are not included.
Which RAID levels does the installed MegaRAID 9361-8i controller support for the four drive bays?
The controller supports RAID 0, 1, 5, 6, 10, 50, and 60 across the four 3.5-inch SATA/SAS bays.
More in Rack & Tower Servers
Similar items
DELL PowerEdge R740 8LFF 2x Xeon Bronze 3106 512GB DDR4 rack server
- Xeon
- 1.7 GHz
DELL PowerEdge R640 4LFF 2x Xeon Silver 4215R 256GB rack server
- Xeon
- 3.2 GHz
DELL PowerEdge R640 8B SFF 48-Core 2x Xeon Platinum 8160 2.1GHz 512GB DDR4 8x 600GB SAS
- Platinum 8160
- 2.1 GHz





