Supermicro SYS-6029U-E1CR4T 2U rack server 2x Xeon Gold 5118 2.3GHz 12-core 16GB DDR4 12x 3.5" bays
2U rack server with dual Xeon Gold 5118 12-core CPUs, 16GB DDR4, MegaRAID 9361-8i controller, twelve 3.5-inch hot-swap bays, four 10GBase-T ports and redundant 1000W power supplies
- ProcessorIntel Xeon
- Installed RAM16 GB
- Video RAM8 MB
- Installed SSDNo
- Processor core count12-Core Processor
- Processor socketLGA 3647
- Dual Xeon Gold 5118 processors deliver 24 cores at 2.3 GHz for heavy workloads
- 16 GB DDR4 ECC memory supports error-corrected performance across 24 DIMM slots
- MegaRAID 9361-8i controller enables RAID 0/1/5/6/10/50/60 across 12 hot-swap 3.5" bays
- Four 10GBase-T ports via Intel X710 provide high-speed network connectivity
- Dual 1000 W Titanium power supplies with IPMI 2.0 ensure redundant power and remote management
Dual Xeon Gold 5118 2U server
The Supermicro SYS-6029U-E1CR4T is a 2U rackmount system populated with two Intel Xeon Gold 5118 processors running at 2.3 GHz with 12 cores each. It ships with 16 GB of DDR4 2400 MHz registered ECC memory across 24 available DIMM slots. Twelve front-accessible 3.5-inch hot-swap bays accept SATA or SAS drives for high-capacity storage arrays. A dedicated IPMI 2.0 port provides out-of-band management with KVM-over-LAN.
Sustained load with redundant power
Dual 1000-watt Titanium-efficiency power supplies operate in redundant hot-swap mode to maintain uptime during continuous enterprise workloads. The MegaRAID 9361-8i controller supports RAID 0, 1, 5, 6, 10, 50 and 60 with 1 GB cached battery-backed write acceleration. Four 10GBase-T ports driven by the Intel X710 controller deliver consistent throughput for virtualization and hyper-converged storage traffic. The LGA 3647 sockets support processors up to 205 W TDP for demanding compute tasks.
Twelve-bay chassis with expansion headroom
The CSE-829U2E1C4-R1K02-T-X11DPU chassis provides twelve 3.5-inch drive trays without installed drives, leaving capacity decisions to the integrator. Six PCIe 3.0 expansion slots include two full-height x16, four full-height x8 and one low-profile x8, plus an internal x8 slot for add-in controllers. Front bezel and rack rails are not included, so mounting hardware must be sourced separately. Matrox G200 graphics with 8 MB video memory handles basic console output only.
How it compares
Measured against everything we stock in Rack & Tower Servers, at today’s prices. Recalculated every night.
- Price $493.99
- Cheaper than about 92% of the 17,640 comparable items (median $1,910.99).
- Installed RAM 16 GB
- Lower than about 90% of the 15,103 comparable items (median 128 GB).
- Video RAM 8 MB
- Typical for this category: the median of 8,309 items is 0.01 GB.
New to this? Buying server hardware with crypto — what to check, what it costs to pay, and what is never asked for.
Specifications
| Product | |
|---|---|
| Brand name | SUPERMICRO |
| Product line | CSE-829U2E1C4-R1K02-T-X11DPU |
| Model name | SYS-6029U-E1CR4T |
| Processor | |
| Processor | Intel Xeon |
| Processor core count | 12-Core Processor |
| Processor socket | LGA 3647 |
| Processor speed | 2.3 GHz |
| Installed CPUs | Gold 5118 |
| Memory | |
| Installed RAM | 16 GB |
| Storage | |
| Installed SSD | No |
| Disk controller | LSI MegaRAID 9361-8i Controller |
| Drive interface | SATA/SAS |
| Supported RAID levels | RAID 0/1/5/6/10/50/60 |
| Graphics | |
| Video RAM | 8 MB |
| Graphics chip | Matrox G200 |
| Connectivity | |
| Network controller | 4x 10GBase-T ports via Intel X710 (AOC-2UR66-i4XTF) |
| Ports & slots | |
| Management interface | RJ 45 |
| Power | |
| Hot-swap redundant PSU | Yes |
| Size & build | |
| Rack height | 1U |
Questions about this item
How loud and hot does the dual Xeon Gold 5118 configuration run under sustained load with the two 1000 W Titanium supplies?
The server uses redundant 1000 W Titanium-efficiency power supplies and 12 hot-swap drive bays; fan speed ramps with CPU and drive temperatures to maintain thermal limits.
Which drives and caddies must I supply to populate the 12 front bays?
The chassis accepts 3.5" SATA or SAS drives in the included Supermicro trays; no drives are installed from the factory.
Will my existing PCIe 3.0 x8 RAID cards and 10 GbE NICs fit the expansion slots?
The system provides two full-height PCIe 3.0 x16 slots, four full-height x8 slots, one low-profile x8 slot and one internal x8 slot.
More in Rack & Tower Servers
Similar items
DELL PowerEdge T430 5U rack server 2x Xeon E5-2650 v4 2.2GHz 32GB DDR4
- 5U
- Rack
DELL PowerEdge R730XD 2U rack server 2x E5-2630 v3 2.4GHz 32GB DDR4 3x 1TB SATA H730
- 2U
- Rack
DELL PowerEdge R630 1U rack server 2x E5-2637 V3 3.5GHz 32GB 2x 1TB H730
- 1U
- Rack





