Supermicro SYS-6048R-E1CR36N 36-bay 4U rack server 2x Xeon E5-2667 v4 512GB DDR4 9361-8i
36-bay 4U rack server with dual 8-core Xeon E5-2667 v4 processors at 3.2 GHz, 512 GB DDR4 ECC memory, MegaRAID 9361-8i controller supporting RAID 0/1/5/6/10/50/60, quad 10GBase-T LAN ports.
- ProcessorIntel Xeon
- Installed RAM512 GB
- Video RAM8 MB
- Installed SSDNo
- Processor core count8-Core Processor
- Processor socketLGA 2011-3
- Dual Xeon E5-2667 v4 at 3.2 GHz base clock with 3.6 GHz turbo for high single-thread speed
- 512 GB DDR4 2400 MHz registered ECC memory across 16 DIMM slots for large datasets
- MegaRAID 9361-8i hardware controller with 1 GB cache and battery backup supporting RAID 0/1/5/6/10/50/60
- 36 hot-swap 3.5" SATA/SAS drive bays in 4U chassis for massive storage density
- Quad 10GBase-T LAN via Intel X540 plus IPMI 2.0 dedicated port for fast remote management
36-bay 4U rack server for dense storage
The SYS-6048R-E1CR36N delivers thirty-six hot-swap 3.5-inch bays in a four-unit rack footprint, driven by dual Xeon E5-2667 v4 processors at 3.2 GHz with eight cores each. 512 GB of DDR4 2400 MHz registered ECC memory is installed across sixteen modules. An LSI MegaRAID 9361-8i controller provides eight internal SAS ports with 1 GB cache and battery backup, supporting RAID levels 0, 1, 5, 6, 10, 50 and 60.
Sustained throughput with redundant power
Dual 1280 W 80 Plus Platinum supplies share the load and allow hot replacement without downtime. The MegaRAID 3108 core maintains consistent parity calculation across large arrays during prolonged rebuilds or sequential workloads. Four 10GBase-T ports from the Intel X540 controller sustain line-rate traffic for replication or backup streams, while IPMI 2.0 on a dedicated RJ45 gives out-of-band access for remote power cycling and KVM-over-LAN.
Tool-less trays and front-to-rear airflow
Thirty-six Supermicro drive trays accept SAS or SATA disks without screws, enabling rapid swap in dense deployments. The chassis omits front bezel and rack rails, so cabinet depth and rail kit must be planned separately. Matrox G200 graphics with 8 MB video memory provides basic console output for BIOS and OS installation. The LGA 2011-3 platform limits future CPU upgrades to the E5-2600 v3/v4 family, so buyers needing newer instruction sets or higher core counts should evaluate alternative platforms.
How it compares
Measured against everything we stock in Rack & Tower Servers, at today’s prices. Recalculated every night.
- Price $2,290.99
- Pricier than about 56% of the 17,640 comparable items (median $1,910.99).
- Installed RAM 512 GB
- Higher than about 80% of the 15,103 comparable items (median 128 GB).
- Video RAM 8 MB
- Typical for this category: the median of 8,309 items is 0.01 GB.
New to this? Buying server hardware with crypto — what to check, what it costs to pay, and what is never asked for.
Specifications
| Product | |
|---|---|
| Brand name | SUPERMICRO |
| Product line | CSE-847BE1C-R1K28LPB-X10DRi-T4+ |
| Model name | SYS-6048R-E1CR36N |
| Processor | |
| Processor | Intel Xeon |
| Processor core count | 8-Core Processor |
| Processor socket | LGA 2011-3 |
| Processor speed | 3.2 GHz |
| Installed CPUs | E5-2667 V4 |
| Memory | |
| Installed RAM | 512 GB |
| Storage | |
| Installed SSD | No |
| Disk controller | LSI MegaRAID 9361-8i Controller |
| Drive interface | SATA/SAS |
| Supported RAID levels | RAID 0/1/5/6/10/50/60 |
| Graphics | |
| Video RAM | 8 MB |
| Graphics chip | Matrox G200 |
| Connectivity | |
| Network controller | 4x 10GBase-T LAN with Intel X540 Ethernet Controller |
| Ports & slots | |
| Management interface | RJ 45 |
| Power | |
| Hot-swap redundant PSU | Yes |
| Size & build | |
| Rack height | 1U |
Questions about this item
How loud and hot does the 4U chassis get with both 145 W Xeons and the two 1280 W platinum supplies running continuously?
The system uses redundant 1280 W 80 Plus Platinum power supplies and dual 145 W TDP Xeon E5-2667 v4 processors; fan speed scales with inlet temperature and CPU load, so sustained full-load operation will increase airflow and heat output accordingly.
Which drives, cables and rails must I supply myself before the 36-bay server can be used?
You must provide 36 SAS or SATA 3.5" drives, matching data cables for the 9361-8i controller, and your own rack-mount rails because the front bezel and rails are not included.
Will the LSI 9361-8i controller and X540 10GBase-T ports work with my existing SAS-2 drives and 1 GbE switches?
Yes, the 9361-8i supports SAS-3 and SAS-2 drives at negotiated speeds, and the Intel X540 ports auto-negotiate down to 1 GbE and 100 MbE for compatibility with older network gear.
More in Rack & Tower Servers
Similar items
DELL PowerEdge T440 5U rack server 2× Xeon Gold 5120 2.2 GHz 14-core 64 GB DDR4 H330 4× 1.92 TB SATA 2× 750 W
- 5U
- Rack
DELL PowerEdge R740 2U Rack Server Gold 6148 20C 32GB 4x 960GB SAS SSD H730P
- Intel
- 32 GB
DELL PowerEdge T440 5U Rack Server 2x Xeon Gold 5118 2.3GHz 12 Core 256GB DDR4 4x 960GB SSD HBA330 2x 750W
- 5U
- Rack





