Supermicro SYS-8048B-TRFT 24x 3.5" 4U rack server 4x Xeon E7-4850 v4 2.1GHz 16-core 512GB DDR4 9361-8i
4U rack server with four Xeon E7-4850 v4 16-core processors, 512GB DDR4, 24 hot-swap 3.5" bays and a MegaRAID 9361-8i controller
- ProcessorIntel Xeon
- Installed RAM512 GB
- Video RAM8 MB
- Installed SSDNo
- Processor core count16-Core Processor
- Processor socketLGA 2011
- Quad-socket Xeon power for heavy workloads
- 512 GB DDR4 ECC memory at 2400 MHz
- 24 hot-swap 3.5" bays for massive storage
- MegaRAID 9361-8i with 1 GB cache and battery
- Dual 10 GbE ports plus IPMI 2.0 management
Quad-socket Xeon 4U server
The Supermicro SYS-8048B-TRFT is a 4U rackmount system populated with four Intel Xeon E7-4850 v4 processors. Each CPU runs at 2.1 GHz with a 2.8 GHz turbo frequency and provides 16 cores. The chassis holds 512 GB of DDR4 2400 MHz registered ECC memory across 32 modules.
Suits storage-heavy workloads; not for GPU compute
This server targets environments that need dense 3.5-inch drive capacity and quad-socket CPU throughput. Twenty-four hot-swap bays accept SATA or SAS drives behind an LSI MegaRAID 9361-8i controller with 1 GB cache. The Matrox G200 graphics core offers only basic video output, so the platform does not suit GPU-accelerated tasks.
24 hot-swap 3.5-inch bays drive the storage decision
The defining specification is the front-accessible bay count: twenty-four 3.5-inch trays supporting SATA and SAS media. No drives are installed, so capacity scales with the disks you add. The eight-port RAID controller manages RAID 0, 1, 5, 6, 10, 50 and 60 across those bays.
How it compares
Measured against everything we stock in Rack & Tower Servers, at today’s prices. Recalculated every night.
- Price $2,438.99
- Pricier than about 59% of the 17,640 comparable items (median $1,910.99).
- Installed RAM 512 GB
- Higher than about 80% of the 15,103 comparable items (median 128 GB).
- Video RAM 8 MB
- Typical for this category: the median of 8,309 items is 0.01 GB.
New to this? Buying server hardware with crypto — what to check, what it costs to pay, and what is never asked for.
Specifications
| Product | |
|---|---|
| Brand name | SUPERMICRO |
| Product line | CSE-848X + X10QBi-R1.01A |
| Model name | SYS-8048B-TRFT |
| Processor | |
| Processor | Intel Xeon |
| Processor core count | 16-Core Processor |
| Processor socket | LGA 2011 |
| Processor speed | 2.8 GHz |
| Installed CPUs | E7-4850 V4 |
| Memory | |
| Installed RAM | 512 GB |
| Storage | |
| Installed SSD | No |
| Disk controller | LSI MegaRAID 9361-8i Controller |
| Drive interface | SATA/SAS |
| Supported RAID levels | RAID 0/1/5/6/10/50/60 |
| Graphics | |
| Video RAM | 8 MB |
| Graphics chip | Matrox G200 |
| Connectivity | |
| Network controller | SuperMicro AOC-STG-i2T - Intel X540–2x RJ45 10GBase-T Ports |
| Ports & slots | |
| Management interface | RJ 45 |
| Power | |
| Hot-swap redundant PSU | Yes |
| Size & build | |
| Rack height | 1U |
Questions about this item
How loud and hot does the 4U chassis get with four 1620 W power supplies running 24/7?
Four 1620 W platinum supplies share the load, and the 4U height allows larger fans to move air at lower RPM, keeping noise and heat lower than a denser 1U or 2U design.
Which drives and cables must I supply to use the 24 hot-swap bays and the 9361-8i controller?
The 24 front bays accept 3.5" SATA or SAS drives; the MegaRAID 9361-8i provides eight 12 Gb/s SAS ports, so you need SAS or SATA drives and matching cables for the remaining bays.
Will the X540 10GBase-T ports and IPMI 2.0 work with my older Cat 5e patch panel and KVM switch?
The two X540 RJ45 ports run 10GBase-T and negotiate down to 1 Gb/s on Cat 5e, while the dedicated IPMI 2.0 RJ45 port works with any standard KVM-over-IP client.
More in Rack & Tower Servers
Similar items
DELL PowerEdge R740xd2 2U Rack Server 2x Xeon 8160 2.1GHz 24C 64GB DDR4 H330 26x 3.5" 2x 1100W
- 2U
- Rack
DELL PowerEdge R630 10SFF 2x Xeon E5-2620 v4 768GB DDR4
- Xeon
- 2.1 GHz





