SXDOOL 10-Pack PCIe 8-Pin Female to Dual 6+2-Pin Male Splitter Cable 18AWG 20cm
Splits one 8-pin PCIe power connector into two 6+2-pin plugs using 18 AWG copper wire in a 10-pack
- Splits one 8-pin PCIe connector into two 6+2-pin plugs for dual GPU power
- 18 AWG UL 1007 copper wire carries high current safely
- 20 cm length keeps cable routing tidy inside the case
- Ten cables in one pack supply multiple builds or spares
- Works with 6-pin and 8-pin graphics cards from major brands
10-Pack PCIe Power Splitters
This 10-pack supplies ten PCIe 8-pin female to dual 6+2-pin male splitter cables, each 20 cm long and built with UL 1007 18 AWG copper wire. They are intended for builders who need to power multiple graphics cards from existing 8-pin PCIe power supply outputs. The black and yellow PVC sleeving matches standard PSU cabling.
Check PSU 8-pin PCIe connectors
Verify that your power supply has enough native 8-pin PCIe ports to accept the female ends of these splitters. Each cable draws from a single 8-pin PCIe source, so the PSU must provide one such connector per splitter used. Ensure the graphics cards require 6-pin or 8-pin PCIe power and not a different connector type. The cables are not compatible with CPU 8-pin (EPS) headers.
Replaces single GPU power cables
These splitters upgrade a build that previously relied on one 8-pin PCIe cable per graphics card, allowing two cards or a single card with dual connectors to run from one PSU port. The jump is worth it when the PSU lacks sufficient native PCIe outputs for the installed GPUs. They do not increase the total wattage available from the PSU rail.
How it compares
Measured against everything we stock in Internal PSU & Riser Cables, at today’s prices. Recalculated every night.
- Price $35.99
- Pricier than about 75% of the 7,693 comparable items (median $14.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
No published specifications for this item yet.
Questions about this item
What does the 10-pack contain and do I need any extra cables?
The pack contains ten PCIe 8-pin female to dual 6+2-pin male splitter cables. No extra cables are included; connect each female end to your PSU’s 8-pin PCIe output and the two male ends to the graphics card.
How do I decide between using the 6-pin or 8-pin side of the 6+2 connectors?
Each male connector splits into a 6-pin block plus a 2-pin block. Attach only the 6-pin portion for cards with a 6-pin socket, or join both portions for an 8-pin socket.
What does the 18 AWG rating mean for my GPU power delivery?
UL 1007 18 AWG copper wire handles the current required by typical mid-range graphics cards over the 20 cm length, keeping voltage drop low between the PSU and the card.
More in Internal PSU & Riser Cables
Similar items
Ruth's sister CXA-0420 PCU-P213C LCD Inverter internal power cable
Lian Li PW-PCI-520X PCIe 5.0 riser cable 200 mm
- PCIe 5.0 Riser Cable
- Black
Silverstone Technology PP14-PCIE 2x PCIe 8-pin to 12VHPWR internal power cable
- 2x PCIe 8pin female
- 1x 12VHPWR PCIe Gen…





