Lian Li UNI Fan TL LCD Wireless 140mm Reverse Blade case fan 14RTLLCD1W1B
- 140 mm
- Fluid Dynamic
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
40 mm 12 V PWM fan spins to 14 000 RPM with dual ball bearings, 4-pin control and 24.03 CFM airflow for compact PC or server cooling
The SXDOOL 40mm fan fits 4028 mounting holes and runs on a 12V four-pin PWM connector. It suits compact servers, small-form-factor PCs or replacement cooling where a high-speed 40mm frame is required. Builders needing larger airflow or quieter operation should choose a bigger fan format. The dual ball bearing supports continuous rotation at the rated speed.
At the rated 14000 RPM the fan moves 24.03 CFM while producing 55.00 dBA of noise. Current draw is 0.75A with a typical running value of 0.55A. The PWM interface allows the motherboard to lower speed and noise when full flow is not needed. No LED lighting is present on this black model.
The dual ball bearing is designed for long-term high-speed operation without sleeve-bearing wear. Speed holds at 14000 RPM ±10% under constant 12V supply, so airflow remains stable during extended server or workstation loads. The four-wire connection reports real-time RPM to the controller for fan-fail detection. Noise stays above 50 dBA whenever the fan runs near maximum speed.
Measured against everything we stock in PC Cooling Fans, at today’s prices. Recalculated every night.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Product type | Case Fan |
| Product color | Black |
| Performance | |
| Rotational speed | >7,000 RPM |
| Airflow rate | 20-25 CFM |
| Power | |
| Power input connector | 4 Pin |
| Size & build | |
| Fan size | 40 mm |
| Bearing design | Ball |
| Environment & compliance | |
| Operating noise | > 50 dBA |
| More details | |
| LED lighting | Non-LED |
Mount the 40x40x28 mm frame using the four corner holes, plug the 4-pin connector into a PWM header so the motherboard can control speed, and verify in BIOS that the header is set to PWM mode — not DC — otherwise the fan will run at fixed 14000 RPM.
The dual ball bearing is sealed and rated for continuous operation at 14000 RPM; no lubrication is required, but expect replacement after several years when noise rises above the specified 55.00 dB(A) or speed drops below 7000 RPM.
At 0.75 A the 12 V line delivers 9 W, so the first limit is thermal — the small 40 mm frame cannot dissipate that heat indefinitely, causing the PWM controller to throttle speed below 14000 RPM to protect the motor.
More in PC Cooling Fans
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?