SXDOOL 8-way fan hub speed controller internal power cable
Connects up to eight 3-pin or 4-pin fans with three-speed control via SATA or Molex power and 3M adhesive mounting
- Connect up to eight fans from one hub
- Power via SATA or Molex 4-pin connector
- Three-speed control with low, off and high settings
- Secure mounting with thick 3M adhesive pad
- Supports both 3-pin and 4-pin fan headers
8-way fan hub with SATA or MOLEX power
This internal cable hub connects up to eight 3-pin or 4-pin fans to a single SATA or 4-pin MOLEX connector from the power supply. A three-position switch on the controller sets LOW, OFF or HIGH speed for all attached fans. The unit mounts inside the case using pre-applied 3M adhesive.
PC builders needing simple grouped fan control
Enthusiasts who want per-fan PWM curves or software monitoring will not find those features here. The hub suits servers, workstations or custom rigs where a single manual speed setting for every fan is acceptable.
Three-speed hardware switch for eight fans
The only specification that decides fit is the three-gear switch (LOW, OFF, HIGH) driving all eight ports simultaneously. If your build requires individual fan curves or motherboard-controlled PWM, this hub will not meet that need.
How it compares
Measured against everything we stock in Internal PSU & Riser Cables, at today’s prices. Recalculated every night.
- Price $15.99
- Typical for this category: the median of 7,693 items is $14.99.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
No published specifications for this item yet.
Questions about this item
Which power input should I choose between the MOLEX 4D and SATA connectors?
Select the connector that matches your power supply's available cables; both deliver the same three-speed control to the hub.
What do the LOW, OFF and HIGH switch positions actually do to my fans?
LOW runs fans at reduced speed, HIGH runs them at full speed, and OFF stops them completely.
How does the SATA power connection limit the number of fans I can run?
The hub supports up to eight 3-pin or 4-pin fans regardless of whether you power it via SATA or MOLEX.
More in Internal PSU & Riser Cables
Similar items
Ruth's sister DB44 to 4x DB9 RS-422/485 internal power cable
Lian Li PW-PCI-520X PCIe 5.0 riser cable 200 mm
- PCIe 5.0 Riser Cable
- Black
Ruth's sister PS5 NVME M.2 SSD Heatsink Thickening Cooling Metal Sheet Thermal Pad internal power cable
Silverstone Technology PP14-PCIE 2x PCIe 8-pin to 12VHPWR internal power cable
- 2x PCIe 8pin female
- 1x 12VHPWR PCIe Gen…





