Lian Li UNI Fan TL LCD Wireless 140mm Reverse Blade case fan 14RTLLCD1W1B
- 140 mm
- Fluid Dynamic
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
80 mm hydraulic case fan spins at 1500 RPM with a 12 V LP4 connector drawing 0.07 A
The SXDOOL 8025 is an 80 mm case fan built around a hydraulic bearing and a nine-blade rotor. It draws 0.07 A at 12 V and connects through a standard LP4 power plug that includes a pass-through connector for daisy-chaining additional fans. The unit suits builders who need a compact 80×80×25 mm cooler for tight chassis spaces or legacy system refreshes. It is not aimed at users who require PWM speed control or addressable lighting effects.
The fan is rated to run at 1500 RPM with a tolerance of ±5 percent and a maximum ceiling below 1600 RPM. Hydraulic bearing lubrication is designed to maintain consistent acoustic output and rotational stability during continuous duty cycles rather than only during short spin-up bursts. Airflow remains steady because the nine-blade geometry is fixed and the two-wire supply delivers constant voltage. There is no onboard temperature curve or firmware to alter behaviour over time.
Confirm that your power supply or fan controller provides a free LP4 (Molex 4-pin) header and that the chassis offers 80 mm mounting holes with 25 mm depth clearance. The male and female pass-through plugs allow series connection, but each unit still draws 0.07 A, so total current on the rail must stay within the supply limit. The fan has no PWM wire, so speed will remain constant unless an external voltage regulator is used.
Measured against everything we stock in PC Cooling Fans, at today’s prices. Recalculated every night.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Product type | Case Fan |
| Product color | Black |
| Performance | |
| Rotational speed | <1,600 RPM |
| Power | |
| Power input connector | LP4 |
| Size & build | |
| Fan size | 80 mm |
| Bearing design | Hydraulic |
| More details | |
| LED lighting | No |
The hydraulic bearing and 9-blade design keep the 8025 quiet at 1500 RPM while drawing only 0.07 A at 12 V, so heat output stays minimal during continuous operation.
You need a free Molex 4-pin (LP4) connector; the fan includes both male and female large 4P plugs so you can daisy-chain it without losing the connector.
The 80×80×25 mm dimensions match standard 80 mm mounting holes, and the LP4 Molex interface is compatible with legacy power supplies found in older cases.
More in PC Cooling Fans
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?