Lian Li UNI Fan TL LCD Wireless 140mm Reverse Blade case fan 14RTLLCD1W1B
- 140 mm
- Fluid Dynamic
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
60 mm dual-ball-bearing PWM fan moves 23.4 CFM at 4250 RPM with 34 dBA noise
The SXDOOL AFC0612D is a 60 mm case fan built for tight spaces that need active airflow. It runs on a 12 V four-pin PWM header so the motherboard can vary speed automatically. The dual ball bearing is rated for long service in continuous operation. Black frame and non-LED blades keep the look neutral inside any chassis.
This unit replaces 40 mm or 50 mm fans that cannot move enough air, or sleeve-bearing models that develop noise over time. The jump is worth it when a component runs hotter than its throttle point and the mounting holes accept a 60 mm frame. PWM control lets the board spin the fan down during idle loads, cutting acoustic impact without losing peak capacity.
At 4 250 RPM the fan delivers 23.4 CFM while measuring 34 dBA, giving enough pressure for VRM heatsinks, chipset blocks or drive cages. Headroom exists for short bursts above the nominal curve, but sustained loads above the rated current will hit the 1.56 W power limit. It is not for builds that need high-volume airflow across large radiators or multiple drive bays.
Measured against everything we stock in PC Cooling Fans, at today’s prices. Recalculated every night.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Product color | Black |
| Performance | |
| Rotational speed | 4000-4,499 RPM |
| Airflow rate | 20-25 CFM |
| Power | |
| Power input connector | 4 Pin |
| Size & build | |
| Fan size | 60 mm |
| Bearing design | 2 Ball |
| Environment & compliance | |
| Operating noise | 20–25 dBA |
| More details | |
| LED lighting | Non-LED |
The 60mm square frame follows the standard 60mm mounting pattern with four corner holes spaced for M3 screws.
Align the keyed 4-pin connector with the motherboard CPU or chassis fan header and press straight down until it clicks; the fourth wire carries the PWM control signal.
Replace the fan if bearing noise rises above the rated 34dBA or if RPM drops noticeably below the 4250RPM specification under full PWM duty.
More in PC Cooling Fans
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?