Lian Li UNI Fan TL LCD Wireless 140mm Reverse Blade case fan 14RTLLCD1W1B
- 140 mm
- Fluid Dynamic
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
A 60mm case fan with double ball bearing, 12V 0.17A power and 25-30 dBA noise for chassis or CPU cooling
This 60 mm chassis fan runs at 12 V and draws 0.17 A through a three-pin connector. Double ball bearings keep the rotor stable at speeds that produce 25 to 30 dBA of noise. The black frame measures 60 by 60 by 25 mm with a 10 cm lead, making it suited to small-form-factor cases, drive bays or targeted component cooling.
Verify that your motherboard or fan controller has a free three-pin header and that the mounting holes match a 60 mm square pattern. The 10 cm cable may need an extension if the header sits far from the fan location. Confirm the chassis has at least 25 mm clearance behind the mounting surface for the frame depth.
Ball bearings resist wear better than sleeve types, so the upgrade is worthwhile when the fan runs continuously in a server, NAS or workstation. The 0.17 A draw is modest enough for most headers, but builders who need PWM speed control or RGB lighting will need a different model.
Measured against everything we stock in PC Cooling Fans, at today’s prices. Recalculated every night.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Product type | Case Fan |
| Product color | Black |
| Power | |
| Power input connector | 3 Pin |
| Size & build | |
| Fan size | 60 mm |
| Bearing design | Ball |
| Environment & compliance | |
| Operating noise | 25–30 dBA |
| More details | |
| LED lighting | Non-LED |
The fan is supplied alone with a 10cm cable; mounting screws are not included and must be sourced separately.
The single model covers a 25 to 30 dBA range; there are no separate versions to select.
Yes, the 0.17A current is well within the typical 1A limit of a 12V 3-pin fan header.
More in PC Cooling Fans
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?