Lian Li UNI Fan TL LCD Wireless 140mm Reverse Blade case fan 14RTLLCD1W1B
- 140 mm
- Fluid Dynamic
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
A 120 mm case fan with 38 mm thickness, dual ball bearings and a 4-pin connector spins at 6000-6499 RPM drawing 4.50 A
The SXDOOL DF1203812B2FN is a 120 mm by 38 mm case fan built for high-static-pressure airflow. It spins between 6000 and 6499 RPM using a dual-ball bearing and draws 4.50 A from a standard 4-pin PWM header. The black, non-LED frame suits industrial or mining rigs that need maximum air movement through dense heatsinks or restricted chassis.
This fan targets builders who must push air through thick radiators, tightly stacked drives or custom mining enclosures. The high current draw and speed range make it effective where standard 120 mm fans stall. Buyers who need quiet operation, low power consumption or RGB lighting should look elsewhere, as the dual-ball bearing and 4.50 A rating prioritise raw airflow over acoustics or aesthetics.
The single specification that determines compatibility is the 4.50 A rating on the 4-pin connector. Most consumer motherboard headers are rated for 1 A to 2 A, so this fan will trip protection or damage the header if plugged directly into a typical board. It requires a dedicated high-current fan controller, a powered hub or a server-class header rated for at least 5 A continuous output.
Measured against everything we stock in PC Cooling Fans, at today’s prices. Recalculated every night.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Product type | Case Fan |
| Product color | Black |
| Performance | |
| Rotational speed | 6000-6,499 RPM |
| Power | |
| Power input connector | 4 Pin |
| Size & build | |
| Bearing design | 2 Ball |
| More details | |
| LED lighting | Non-LED |
At 6000-6499 RPM this 120 mm fan moves a lot of air, so expect noticeable noise and a 4.50 A draw on the 12 V rail; ensure your case airflow can exhaust the heat it pushes.
It requires a standard 4-pin PWM header supplying 12 V DC; the motherboard or fan controller must be able to deliver 4.50 A for full speed.
The mounting holes match the 120 mm pattern, but the 38 mm depth is thicker than many older fans, so check chassis and radiator clearance first.
More in PC Cooling Fans
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?