Lian Li UNI Fan TL LCD Wireless 140mm Reverse Blade case fan 14RTLLCD1W1B
- 140 mm
- Fluid Dynamic
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
A 60 mm case fan with ball-bearing motor delivering 15-20 CFM at 3500-3999 RPM and 5-10 dBA noise on a 3-pin connector
The SXDOOL DF126010BL is a 60 mm square frame fan that mounts in tight chassis locations where larger rotors will not fit. It runs on 12 V power and draws 0.18 A, making it suitable for small-form-factor builds, rack-mount appliances or targeted component cooling. The 3-pin connector provides basic voltage control without PWM circuitry. Builders who need higher static pressure or larger airflow volumes should look elsewhere.
A ball bearing supports the rotor at speeds between 3500 and 3999 RPM, delivering 15 to 20 CFM of airflow while the manufacturer rates noise at 5 to 10 dBA. The supplier data sheet also lists a 4200 RPM sample point with 18.26 CFM and 32 dBA, showing how sound rises with voltage. Power draw stays low at 0.18 A to 0.20 A, so the fan adds minimal load to a 12 V rail.
The package supplies the fan unit and standard mounting screws for 60 mm hole patterns. No fan-speed controller, adapter cables, rubber anti-vibration pads or software utilities are bundled. The 3-pin lead connects directly to a motherboard header or fan hub; any speed adjustment depends on the host system’s voltage-regulation capability.
Measured against everything we stock in PC Cooling Fans, at today’s prices. Recalculated every night.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Product color | Black |
| Performance | |
| Rotational speed | 3500-3,999 RPM |
| Airflow rate | 15-20 CFM |
| Power | |
| Power input connector | 3 Pin |
| Size & build | |
| Fan size | 60 mm |
| Environment & compliance | |
| Operating noise | 5–10 dBA |
| More details | |
| LED lighting | Non-LED |
Use four screws through the 60mm square frame into your case fan slots; the label side is usually the intake, so aim it toward the component you want to cool.
Ball bearings typically run for years; if noise rises above the rated 32 dBA or rotation becomes uneven, plan to swap the fan.
Without a fourth PWM wire the motherboard can only vary voltage, so fine-grained speed curves below 3500 RPM are not possible.
More in PC Cooling Fans
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?