SXDOOL DFS500912M 12V 1.6W 45mm 35mm x 35mm x 27mm vga cooling
A 45 mm diameter VGA cooling fan with 35 mm hole spacing and 27 mm thickness runs on 12 V and draws 1.6 W through a 3-wire 3-pin connector
- 12 V 1.6 W power draw keeps energy use low
- 45 mm fan diameter fits tight graphics card spaces
- 35 mm x 35 mm hole spacing matches common mounting patterns
- 27 mm overall height clears low-profile chassis
- 3-wire 3-pin connector enables speed monitoring
Compact VGA Cooling Fan
The SXDOOL DFS500912M is a 12 V replacement cooler built for graphics cards and industrial routers. It suits repair technicians and system integrators who need a direct drop-in part for legacy or embedded boards.
45 mm Diameter With 35 mm Mounting Holes
The fan measures 45 mm across and uses a 35 mm by 35 mm hole pattern with a 27 mm offset. Verify these exact dimensions against the original cooler before ordering, as no other spacing will align.
Three-Wire Three-Pin Connection
A 3-wire 3-pin header supplies power and a tachometer signal to the host board. The 1.6 W motor runs from a standard 12 V rail, leaving adjacent slots clear and requiring no extra cabling or adapters.
How it compares
Measured against everything we stock in GPU Fans & Heatsinks, at today’s prices. Recalculated every night.
- Price $10.99
- Cheaper than about 93% of the 143 comparable items (median $19.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
No published specifications for this item yet.
Questions about this item
What does the 1.6 W power rating mean for actual cooling performance?
The fan draws 1.6 W from a 12 V supply, so it provides modest airflow suited to low-profile graphics cards or small industrial boards rather than high-end GPUs.
What does the 3-wire 3-pin connection limit in practice?
The 3-pin header allows speed reporting but not PWM control, so the fan runs at a fixed voltage level set by the motherboard or graphics card.
Will the 35 mm x 35 mm mounting holes and 45 mm diameter fit my card?
The fan measures 45 mm across with screw holes spaced 35 mm by 35 mm and a 27 mm frame depth, so it fits coolers designed for that exact pattern.
More in GPU Fans & Heatsinks
Similar items
SXDOOL 95MM CF1015H12D VGA Cooling Fan Replacement Sapphire NITRO RX590 RX580 RX570 RX480 RX470
- Case Fan
Thermaltake CL-W183-CU00TR-A Pacific V-GTX 1080Ti Founders Edition Transparent vga cooling
- NIVDIA Geforce GTX…
- Dimension: 22.6 × 1…
SXDOOL BASO71OR2UDiameter 65mm 12V 0.5A 4-pin vga cooling
- 4 Pin
- CPU Cooler Fan
Thermaltake CL-W184-CU00TR-A Pacific V-GTX 1080Ti Transparent ASUS ROG vga cooling
- ASUS ROG STRIX GTX1…
- Dimension: 19.4 × 1…





