Lian Li UNI Fan TL LCD Wireless 140mm Reverse Blade case fan 14RTLLCD1W1B
- 140 mm
- Fluid Dynamic
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
An 80 mm dual-ball-bearing case fan running up to 10000 RPM with 4-pin PWM control
The SXDOOL DYTB0838B2U is an 80 mm by 38 mm case fan designed for systems that need concentrated airflow in tight spaces. Its 4‑pin PWM connector allows the motherboard to regulate speed automatically. The unit suits compact workstations, industrial enclosures or mining rigs where a slim 80 mm footprint is required.
Dual ball bearings support a rated speed of 10 000 RPM while keeping friction low over long duty cycles. Rated current sits at 1.25 A and peak current reaches 2.1 A at 12 V, so the fan draws noticeable power when spun up. Expect audible airflow noise at maximum RPM; PWM control lets you lower speed for quieter operation when full flow is not needed.
The all‑black plastic frame carries no lighting, keeping the look neutral for professional or embedded installations. Four mounting holes match the common 80 mm pattern, so the fan drops into existing brackets without adapters. The 4‑pin header supplies both power and speed feedback, enabling closed‑loop control from any standard PWM header.
Measured against everything we stock in PC Cooling Fans, at today’s prices. Recalculated every night.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Product type | Case Fan |
| Product color | Black |
| Performance | |
| Rotational speed | >7,000 RPM |
| Power | |
| Power input connector | 4 Pin |
| Size & build | |
| Fan size | 80 mm |
| Bearing design | Ball |
| More details | |
| LED lighting | Non-LED |
Align the 80 mm screw holes with the chassis or radiator, secure with four screws, then plug the 4-pin PWM connector into the motherboard or controller header so the board can regulate speed.
The dual ball bearing is sealed and requires no lubrication; if noise or vibration appears after extended running at 10000 RPM, replace the fan unit.
Continuous running at 10000 RPM draws the full 2.1 A, so the power header or supply must sustain that current without voltage droop or thermal throttling.
More in PC Cooling Fans
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?