Lian Li UNI Fan TL LCD Wireless 140mm Reverse Blade case fan 14RTLLCD1W1B
- 140 mm
- Fluid Dynamic
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
A 70 mm, 12 V case fan with a 3-pin connector designed for DWPH UPS C1K, C2K and C3K power supplies
This 70 mm case fan is built as a direct replacement for DWPH UPS C1K, C2K and C3K power-supply units. It fits the 70×70×15 mm mounting pattern and uses a three-pin connector for speed monitoring. The non-LED black frame keeps the appearance neutral inside the chassis. Buyers needing a different voltage, connector type or frame depth will need another model.
Rated at 12 V and 0.30 A, the fan draws modest power while providing cooling airflow for the UPS power supply. The manufacturer describes it as a mute silent cooler, indicating low acoustic output during normal operation. No LED lighting means no extra light bleed in darkened rooms. The three-wire design allows the host system to read fan speed for basic thermal management.
The 7015 form factor and 0.30 A current rating are specified for continuous duty in the target UPS units. Speed reporting via the third wire lets the power supply adjust cooling as load changes over long periods. Because the fan is designed for a specific OEM application, it is not intended for general-purpose case ventilation or high-static-pressure radiator setups.
Measured against everything we stock in PC Cooling Fans, at today’s prices. Recalculated every night.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Product type | Case Fan |
| Product color | Black |
| Power | |
| Power input connector | 3 Pin |
| Size & build | |
| Fan size | 70 mm |
| More details | |
| LED lighting | Non-LED |
Remove the power supply cover, unplug the old fan, align the 70mm mounting holes, secure the fan with four screws, and connect the 3-pin header so the tachometer wire reads speed.
Dust the blades and frame every few months with compressed air; the sleeve bearing cannot be relubricated, so plan to replace the fan when noise or vibration increases.
The 0.30A current rating is the first constraint — sustained loads that push the supply toward its maximum output will heat the fan beyond its design airflow.
More in PC Cooling Fans
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?