Lian Li UNI Fan TL LCD Wireless 140mm Reverse Blade case fan 14RTLLCD1W1B
- 140 mm
- Fluid Dynamic
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
A 120x120x38 mm case fan delivering 250 CFM airflow at up to 6300 RPM with 4-pin PWM control and ball bearing
The SXDOOL g1238c12b8zp-c5 is a 120 x 120 x 38 mm case fan built for systems that demand strong airflow. It runs on 12 V and draws 1.85 A for a rated power of 20 W. The ball bearing supports a speed range of 800 to 6300 RPM with a tolerance of ±10 %. This fan targets builders who need high static pressure in a standard 120 mm mounting footprint.
A four-pin power connector enables motherboard PWM speed regulation so the fan can scale between its minimum and maximum speeds automatically. No separate controller or software utility is required; the standard PWM signal handles the adjustment. The bundled function is limited to this speed regulation and does not add lighting control or additional monitoring features.
The 38 mm thickness exceeds the 25 mm depth common in many chassis, so clearance at the front, top or rear panel must be verified before installation. At full speed the fan produces 52 dBA of noise, which is audible in quiet environments. The 4-pin PWM interface relies on motherboard header support; boards without a fourth pin will run the fan at fixed voltage instead of variable speed.
Measured against everything we stock in PC Cooling Fans, at today’s prices. Recalculated every night.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Product type | Case Fan |
| Power | |
| Power input connector | 4 Pin |
| Size & build | |
| Bearing design | Ball |
The ball bearing is rated for continuous operation at up to 6300 RPM; typical service life exceeds several years under normal case temperatures, so replacement is rarely needed during a standard build cycle.
The 20 W power draw and 1.85 A current set the thermal ceiling; if the 12 V supply cannot maintain voltage under load, speed will throttle below the 800-6300 RPM range and airflow will fall.
At full PWM duty the fan produces 52 dBA and moves air at 12.8 m/s with 1.1 inH2O pressure; the motor draws 20 W, so case airflow must remove that heat to keep temperatures stable.
More in PC Cooling Fans
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?