SXDOOL GA82S2H 108mm 30-35 CFM vga cooling
Two 108 mm replacement fans deliver 30-35 CFM for compatible GTX 1060 cards
- Fan size108 mm
- Airflow rate30-35 CFM
- 108 mm fan delivers 30-35 CFM airflow for effective cooling
- Two fans per pack cover dual-slot graphics cards
- 12 V DC 0.36 A motor runs from standard 4-pin header
- 75 x 75 x 15 mm frame matches GALAX and KFA2 GTX 1060 layouts
- Replacement fan only — no heatsink or screws included
Replacement Fan for Galax and KFA2 GTX 1060
This pair of 108 mm fans is designed as a direct replacement for the GA82S2H cooler used on select Galax GTX 1060 and KFA2 GTX 1060 graphics cards. Each unit operates at 12 V and draws 0.36 A through a standard 4-pin header. The blades deliver 30 to 35 CFM of airflow.
Suitable for owners of matching Galax
Buyers must verify the physical dimensions and mounting-hole spacing against the original fan before ordering. The package contains only the two fans; no heatsink, screws or thermal pads are included. Installers who need a complete cooler assembly or a different connector layout should look elsewhere.
108 mm frame with 30 to 35 CFM airflow
The 108 mm diameter and 30 to 35 CFM rating determine whether this fan can move enough air for the specific heatsink it will sit on. Measure the existing fan's length, width and hole pattern — approximately 75 mm by 75 mm — to confirm compatibility.
How it compares
Measured against everything we stock in GPU Fans & Heatsinks, at today’s prices. Recalculated every night.
- Price $18.99
- Cheaper than about 55% of the 143 comparable items (median $19.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
| Product | |
|---|---|
| Brand name | Rexflo |
| Performance | |
| Airflow rate | 30-35 CFM |
| Size & build | |
| Fan size | 108 mm |
Questions about this item
How do I know this 108mm GA82S2H fan fits my GTX 1060?
Measure your card's fan mounting holes and compare them to the 75mm x 75mm frame; the listing covers GALAX and KFA2 GTX 1060 models but hole spacing varies even within the same GPU.
What does the 30-35 CFM airflow figure deliver inside a case?
That range is typical for a 108mm replacement fan spinning at 12V 0.36A, moving enough air to cool a mid-range GTX 1060 heatsink under load.
Will the 4-pin header work with my motherboard or GPU fan controller?
Yes, the 4-pin PWM connector plugs into standard GPU or motherboard headers and lets the controller adjust speed automatically.
More in GPU Fans & Heatsinks
Similar items
Thermaltake CL-W183-CU00TR-A Pacific V-GTX 1080Ti Founders Edition Transparent vga cooling
- NIVDIA Geforce GTX…
- Dimension: 22.6 × 1…
SXDOOL PLD09210S12HHVoltage 87mm VGA Cooling Fan 12V .40A 3Pin
- 87 mm
- >80 CFM
Thermaltake CL-W184-CU00TR-A Pacific V-GTX 1080Ti Transparent ASUS ROG vga cooling
- ASUS ROG STRIX GTX1…
- Dimension: 19.4 × 1…





