Lian Li UNI Fan TL LCD Wireless 140mm Reverse Blade case fan 14RTLLCD1W1B
- 140 mm
- Fluid Dynamic
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
An 80 mm hydraulic-bearing case fan delivering 60 CFM at 3500 RPM with 32 dBA noise on a 3-pin 12 V connector
The SXDOOL JF0825S1SA-R is an 80 mm case fan built around a hydraulic bearing for long service life. It runs on 12 V at 0.26 A and connects via a 3-pin power connector. The black non-LED frame suits UPS units such as Castle series C1K C2K C3K and Shante power supplies as well as small-form-factor enclosures.
At 3500 RPM the fan moves 60 CFM while producing 32 dBA of noise. The specifications allow a speed range up to 3999 RPM with airflow reaching 65 CFM and noise up to 35 dBA. Power draw stays at 0.26 A on the 12 V rail. The hydraulic bearing keeps friction low for consistent acoustic output.
This unit is a direct drop-in for a failed JAMICON JF0825S1SA-R in the listed UPS models. The jump is worth it when the original fan develops bearing noise or stops spinning. It is not for builders who need PWM speed control via a 4-pin header or who require higher static pressure for dense radiator stacks.
Measured against everything we stock in PC Cooling Fans, at today’s prices. Recalculated every night.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Product color | Black |
| Performance | |
| Rotational speed | 3500-3,999 RPM |
| Airflow rate | 60-65 CFM |
| Power | |
| Power input connector | 4 Pin |
| Size & build | |
| Fan size | 80 mm |
| Bearing design | Hydraulic |
| Environment & compliance | |
| Operating noise | 30–35 dBA |
| More details | |
| LED lighting | Non-LED |
Align the three pins with the motherboard or UPS header, press straight down until the latch clicks, and verify the keyed tab matches the socket notch so the yellow tachometer wire is not shifted one pin over.
The hydraulic bearing is sealed and requires no lubrication; if noise rises above the rated 32 dBA or speed drops below 3500 RPM, replace the entire fan.
Under continuous load the fan runs at 3500 RPM producing 32 dBA; if the system demands higher airflow the noise will rise toward 35 dBA before thermal limits are reached.
More in PC Cooling Fans
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?